Embedded Intel® Core™ Processors
Communicate Intel® Core™ Hardware, Software, Firmware, Graphics Concerns
1268 Discussions

No Boot Time Difference: First And Subsequent Boots (After Programming Slimbootloader Image)

Siddhartha
New Contributor I
1,688 Views

Hi.

 

We use Slimbootloader MR8 code (release image) on the i7-1185GRE processor on a custom

circuit board based on UP3 Tiger Lake.

 

After programming the Slimbootloader image to our circuit board:

1. We power-cycle & observe a certain boot time (say Tfirst_boot).

2. We power-cycle few more times & observe the boot times (say Tsecond_boot, Tthird_boot ...).

 

We expect: Tfirst_boot should be larger than subsequent boot times since memory training

should NOT be repeated after the first boot. But we don't see such behaviour.

 

Instead,  Tsecond_boot, Tthird_boot  etc are comparable to Tfirst_boot .

 

What's going on? What Slimbootloader settings allow memory training only once?

 

Thanks.

 

0 Kudos
10 Replies
CarlosAM_INTEL
Moderator
1,666 Views

Hello, @Siddhartha:

Thank you for contacting Intel Embedded Community.

The information that may help you as a reference is stated in the following website:

https://slimbootloader.github.io/developer-guides/boot-performance.html

Best regards,

@CarlosAM_INTEL.

 

Siddhartha
New Contributor I
1,655 Views

Hi Carlos.

 

Thanks for your reply. We have seen that link before, but it doesn't solve our problem.

 

I forgot to mention in my post:

    The memory init code (FspMemoryInit) seems to lie in the Intel FSP binary provided with Slimbootloader.

 

We don't know how to configure Slimboot such that memory training occurs just once. What do you suggest?

 

Thanks.

 

0 Kudos
CarlosAM_INTEL
Moderator
1,643 Views

Hello, @Siddhartha:

Thanks for your reply.

We suggest as a reference addressing your questions to the channel stated on the following website:

https://github.com/intel/FSP/issues

Best regards,

@CarlosAM_INTEL.

Siddhartha
New Contributor I
1,585 Views

Thanks  @CarlosAM_INTEL, We have posted on that website. Let's hope they can solve our problem!

0 Kudos
joses_C_Intel
Employee
1,500 Views

Hi @CarlosAM_INTEL, team,

 

Good evening. I'm Josh and I am currently looking into this issue. 

Can someone assist @Siddhartha on how to obtain IPS access? I already made some preliminary investigations, but to move forward, this should be submitted as an IPS ticket which I need to own.

 

With best regards,

Josh

CarlosAM_INTEL
Moderator
1,476 Views

Hello, @joses_C_Intel:

Thank you for contacting Intel Embedded Community.

We sent an email to your address with information that may answer your previous communication.

Best regards,

@CarlosAM_INTEL

joses_C_Intel
Employee
1,457 Views

Hi @CarlosAM_INTEL ,

 

Good morning.  Got it. Thanks a lot!

 

Hi @Siddhartha ,

 

Good morning. Please contact your local FAE on IPS access. I will take it from there.

 

With best regards,

Josh

Siddhartha
New Contributor I
1,371 Views

Hi Josh (@joses_C_Intel).

 

Thanks for your post. Currently we do NOT have an assigned FAE.

 

We have contacted an Intel Senior FAE (in Bengaluru, India) today. (In fact, I've sent him a link to this conversation.)

We have asked him to recommend an FAE. Based on his recommendation, we will get back to you.

 

Thanks for your assistance!

 

0 Kudos
Siddhartha
New Contributor I
1,115 Views

 @CarlosAM_INTEL@joses_C_Intel

 

Hi Josh,

 

I got the ability to make a new IPS case (with the Tigerlake product) only now. Sorry for the delay!

 

The IPS Case Number is XXXXXXXX.

 

Hope you can help us now. Thanks!

 

0 Kudos
CarlosAM_INTEL
Moderator
1,102 Views

Hello, @Siddhartha:

Thanks for your update, which has been edited to avoid showing confidential information.

We are glad and we suggest stay tuned to the case that you have created in the cited channel. 

Best regards,

@CarlosAM_INTEL.

Reply