Program MAC Address

[TFont1]

I have to create a batch file to run something like Quartzville Tools in order to program MAC Address' for different units. For each unit it will increment the MAC Address, how could I go about doing this? I know that people used to use Quartzville Tools to do this, but does it still support newer adapters as well?

[CarlosAM_INTEL]

Hello, Tyler_Fontaine :

Thank you for contacting Intel Embedded Community.

We suggest you use the https://edc.intel.com/Link.aspx?id=3815 Intel Network (Quartzville) Connections Tools 21.1 PV LAN Software Tools [05-Oct-2016] document # 348742 to solve this situation.

We hope that this information is useful to you.

Best regards,

Carlos_A.

[TFont1]

Carlos_A:

In order to program our old chipset we were able to simply run a batch file containing the following:

"eeupdate /NIC=3 /D 82583.txt

eeupdate /NIC=3 /A ADDRESS.DAT

copy eelog.dat ADDRESS.DAT"

Would this same approach work for the I210 Chipset with INVM?

[CarlosAM_INTEL]

Hello, Tyler_Fontaine :

Thanks for your update.

It is important to let you know that the Eeupdate works with all of Intel's current adapters.

We hope that this information may help you.

Best regards,

Carlos_A.