Whiskey Lake CRB Firmware

[tallu]

Hi

Where can I found Whiskey Lake CRB firmware?

I currently use the following core version: 1.4.3.0 RP01.

Regards,

Tal

[CarlosAM_INTEL]

Hello, @tallu:

Thank you for contacting Intel Embedded Community.

You can find the information that may answer your question in sections 2.2 and 2.5, on pages 8, 12, 13, and 14 of the Whiskey Lake U Platform Intel®Converged Security and Management Engine Firmware12.0 Consumer and Corporate Release Notes - NDA document #626969. You can find this document when you are logged into your Resource & Design Center (RDC) privileged account on the following website:

http://www.intel.com/cd/edesign/library/asmo-na/eng/474233.htm

Your RDC Account update request or report any inconveniences with the provided site should be handle through the RDC Support form. You can find it on the following website:

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

Best Regards,

@CarlosAM_INTEL.

[tallu]

Hi @CarlosAM_INTEL 

Thanks for your help.

As far as I can understand, this document speaks only of Intel CSME firmware which is part of the BIOS.

Am I wrong?

Isn't there a place with binary ready to flash BIOS images for WHL CRB?

Regards,

Tal

[CarlosAM_INTEL]

Hello, @tallu:

Thank you for contacting Intel Embedded Community.

You may use the Coffee Lake and Whiskey Lake Reference Platform RVP Customer Reference Board (CRB) BIOS document # 573420. You can find it when you are logged into your Resource & Design Center (RDC) privileged account in the following website:

https://cdrdv2.intel.com/v1/dl/getContent/573420

Your RDC Account update request and report any inconveniences with the provided site through filling out the RDC Account Support form. You can find it on the following website:

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

Best regards,
@CarlosAM_INTEL.

[tallu]

Hi @CarlosAM_INTEL 

The pdf inside the zip file pointed in 573420 says:

This release doesn’t include full SPI Image.

And then"

To create either 1x32M full SPI image of the CRB BIOS:
1. Download latest System BIOS
2. Search for the latest Intel® Management Engine Firmware kit.
3. Download and install the Intel® ME Firmware kit.
4. Follow instructions to build appropriate full image as described in the
“Intel(R) ME FW Bring Up Guide” document (part of the Intel® ME
Firmware kit)

Where can I find "latest System BIOS" for WHL CRB?

Regards,

Tal

[CarlosAM_INTEL]

Hello, @tallu:

Thanks for your reply.

We have sent you an email with some suggestions that may help you.

Best regards,

@CarlosAM_INTEL.