Embedded Intel® Core™ Processors
Communicate Intel® Core™ Hardware, Software, Firmware, Graphics Concerns

eepromARMtool

JDubo5
Beginner
3,017 Views

Where do I get the eepromARMtool source code so I can program the NVM of the i210 on one of our ARM based embedded products?

0 Kudos
15 Replies
CarlosAM_INTEL
Moderator
1,405 Views

Hello, jsdmichaud1 :

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

0 Kudos
宾胡
Beginner
1,405 Views

Hi Carlos,

Could you provide a copy of eepromarmtool for me? Thanks!

Best regards!

hubin

0 Kudos
CarlosAM_INTEL
Moderator
1,405 Views

Hello, hubin:

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

0 Kudos
NBart5
Beginner
1,405 Views

Hi Carlos,

I also need to program the NVM of the i211 ethernet controller. Could you contact me so that I can get access to the eepromARMtool? Thanks!

Best regards,

Nicolas

0 Kudos
CarlosAM_INTEL
Moderator
1,405 Views

Hello, Nicolas :

Thank you for contacting Intel Embedded Community.

In order to help you, you need to have an Embedded Design Center (EDC) privileged account that should be requested by filling out the https://signin.intel.com/ContactUs Contact Us form.

We hope that this information may help you.

Best regards,

Carlos_A.

0 Kudos
NBart5
Beginner
1,405 Views

Hi Carlos,

I have been granted privileged access to the EDC. How can I get access to the eepromARMtool now?

Best regards,

Nicolas

0 Kudos
CarlosAM_INTEL
Moderator
1,404 Views

Hello, Nicolas:

Thanks for your update.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

0 Kudos
AZhu
Beginner
1,405 Views

Dear Carlos A

I do also need eepromARMtool. And I do also have account.

Could you please advise how I can get the tool.

Thank you.

0 Kudos
CarlosAM_INTEL
Moderator
1,405 Views

Hello, anthonyzhu:

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

0 Kudos
AZhu
Beginner
1,405 Views

Dear Carlos_A

I can't dump and there is a Bus error. Is there anything I need to change?

By the way, I'm using i210 with external flash.

0 Kudos
CarlosAM_INTEL
Moderator
1,405 Views

Hello, anthonyzhu:

Thanks for your reply.

In order to be on the same page, could you please tell us if the affected i210 design is a third party device or it is your own design? In case that it is a third party one, please let us know all the information related to it? In case that it is your design, could you please clarify if it has been reviewed by Intel?

Please let us know the information that may answer these questions to better help you.

Best regards,

Carlos_A.

0 Kudos
AZhu
Beginner
1,405 Views

Dear Carlos_A

It's our own design & this circuit have been used by Intel x86 system in many projects.

It's with 8Mbit external flash . LAN function is ok if I mount eeprom which is already have data(FW & MAC) in it.

Can I contact you by mail?

Thanks.

0 Kudos
CarlosAM_INTEL
Moderator
1,405 Views

Hello, anthonyzhu:

Thanks for your reply.

We suggest you verify that the affected fulfills the requirements stated as answers to the questions 2.10 and 2.23, on pages 7 and 9 of the https://www.intel.com/content/dam/www/public/us/en/documents/faqs/ethernet-controller-i210-i211-faq.pdf Intel(R) Ethernet Controller I210/I211Frequently Asked Questions (FAQs) document # 335346.

On the other hand, you can request a review of your design to Intel using the procedure stated at the https://edc.intel.com/Tools/Design-Review/Default.aspx?language=en Design Review Services website.

We hope that this information may help you to solve this inconvenience.

Best regards,

Carlos_A.

0 Kudos
UFink
Beginner
1,405 Views

Hi Carlos,

Could you provide a copy of eepromarmtool for me? Thanks!

Best regards!

Ulrich

0 Kudos
CarlosAM_INTEL
Moderator
1,405 Views

Hello, IesY1:

Thank you for contacting Intel Embedded Community.

In order to help you, you need to have an Embedded Design Center (EDC) privileged account that should be requested by filling out the https://signin.intel.com/ContactUs Contact Us form.

We hope that this information may help you.

Best regards,

Carlos_A.

0 Kudos
Reply