eepromARMtool

[AHeon1]

Where do I get the eepromARMtool source code so I can program the NVM of the i210 on one of our ARM based embedded products?

[CarlosAM_INTEL]

Hello, AlexisHeon:

Thank you for contacting Intel Embedded Community.

The information you seek is classified as Intel confidential which requires a CDNA between your company and Intel as well as a Privileged EDC account. To request an upgrade from your Basic EDC account to a Privileged

account, go to https://www.intel.com/content/www/us/en/forms/design/registration-privileged.html https://www.intel.com/content/www/us/en/forms/design/registration-privileged.html from there you can request an upgrade.

Please let us as soon as your account is upgraded to privileged.

Best regards,

Carlos_A.

[CarlosAM_INTEL]

Hello, AlexisHeon:

In order to help you with your upgrade process, please use the channels listed at the https://www.intel.com/content/www/us/en/forms/design/contact-support.html Resource & Design Center Account Support website, where you can find the phone numbers or the form to be filled in order to help you.

We hope that this information may help you.

Best regards,

Carlos_A.

[AHeon1]

Thanks Carlos,

I've asked a colleague jsdmichaud to request the tool. He has an upgraded account.

Regards

[CarlosAM_INTEL]

Hello, AlexisHeon :

Thanks for your update.

Reviewing the jsdmichaud's EDC profile is an EDC Basic account.

Due to this fact, we suggest you use the channels listed at my previous communication to solve any inconvenience with their account.

We hope that this information may help you.

Best regards,

Carlos_A