Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
91 Views

Coreboot & EDKII setup used for tlaquepaque CRB

Can we get access to the Coreboot & EDK-II source code ported on tlaquepaque CRB?

0 Kudos
5 Replies
Highlighted
Moderator
83 Views

Hello, @Tamilselvan:

Thank you for contacting Intel Embedded Community.

You need to address this type of request to channel listed as a reference in the following website:

https://www.coreboot.org/consulting.html

Best regards,

@Mæcenas_INTEL.

0 Kudos
Highlighted
Beginner
75 Views

Hi,

In our design, Discrete chips of DDR4 will be used instead of DIMMs.

In Binary Configuration Tool, there is no option of configuring DDR4 for discrete chips. I could see only the DIMMs option(RDIMM/UDIMM).

Can we get any reference code to configure the DDR4 for the discrete chips option? Where can i find the DDR4 configuration sequence?

Thanks,

Tamilselvan N

 

 

 

0 Kudos
Highlighted
Moderator
72 Views

Hello, @Tamilselvan:

Thanks for your reply.

The Memory Reference Code consultations should be addressed to the BIOS developer. However, you are using Coreboot then your consultations should be addressed to the channel mentioned in our previous communication.

Best regards,

@Mæcenas_INTEL.

0 Kudos
Highlighted
Beginner
31 Views

Hi @Mæcenas_INTEL

Thanks for the reply.

Can we get the BSF used along with FSP in the tlaquepaque CRB?

This will be a great reference to our design.

Thanks,

Tamilselvan N

0 Kudos
Highlighted
Moderator
22 Views

Hello, @Tamilselvan:

Thanks for your reply.

Your last request should be addressed as a reference to the channel listed in the following website:

https://github.com/intel/FSP/issues

Best regards,

@Mæcenas_INTEL.

0 Kudos