Community
cancel
Showing results for 
Search instead for 
Did you mean: 
MZvon
Beginner
2,916 Views

Xeon E3-1505l v5 pinouts

Jump to solution

Hello!

We plan to design the board based on Xeon E3-1505l v5 processor, but I couldn't find in datasheet (# 332986-002EN Oct. 2015) pin assignment. There is paragraph "6 Signal Description", but there is no information about pin assignment. Also there is no detail information about package. There is paragraph "8 Package mechanical Specifications", but no drawings with detail information for pcb.

The same situation with platform controller hub - CM236. In datasheet (# 332690-001EN) there is no information about pinouts and package.

I'll be very appreciate if somebody say where I can find this information.

Thanks in advance.

0 Kudos
1 Solution
CarlosAM_INTEL
Moderator
297 Views

Hello Zv_mike,

Thanks for your reply.

The information that may help you is stated in the https://edc.intel.com/Link.aspx?id=13062 Skylake H Processor BGA Package Ballout Mechanical Specification document # 544344,

We hope that this information is useful to you.

Best Regards,

Carlos_A.

View solution in original post

18 Replies
CarlosAM_INTEL
Moderator
297 Views

Hello Zv_mike,

Thank you for contacting Intel Embedded Community.

In order to help you, please update your Embedded Design Center (EDC) account to Privileged type. To request an upgrade from your Basic EDC account to a Privileged account, go to/www.intel.com/content/www/us/en/embedded/embedded-design-center-support.html http://www.intel.com/content/www/us/en/embedded/embedded-design-center-support.html and click on "Manage Your Intel Profile" found in the "Manage Your Account" section of the page. From there you can request an upgrade. After you submit the application, please let us know and we will expedite the review of your application. The application can be found at:

/www-ssl.intel.com/content/www/us/en/forms/intelligent-systems/registration-po.html https://www-ssl.intel.com/content/www/us/en/forms/intelligent-systems/registration-po.html

Thanks for your cooperation to solve this inconvenience.

 

Best Regards,

Carlos_A.

MZvon
Beginner
297 Views

Hello Carlos_A!

Thank you for your reply!

I have already requested the upgrade to privileged account and I validated my corporate e-mail address. My company has signed CNDA (# 9068769) with Intel, but the status still "Account request pending review".

MZvon
Beginner
297 Views

Hello, Carlos_A!

My account is upgraded to privileged now.

Can you help me now to find out the information about pinouts and detail mechanical specifications for processor Xeon E3-1505Lv5 and platform controller hub (PCH) CM236?

CarlosAM_INTEL
Moderator
297 Views

Hello Zv_mike,

Thanks for your updates.

We are glad to hear that your account has been updated.

Now, we are working to give you an update as soon as possible.

Thanks in advance for your patience and understanding.

Best Regards,

Carlos_A.

MZvon
Beginner
297 Views

Hello Carlos!

Thank you for your reply!

I have already requested the upgrade to privileged account and I validated my corporate e-mail address. My company has signed CNDA (# 9068769) with Intel, but the status still "Account request pending review".

CarlosAM_INTEL
Moderator
297 Views

Hello Zv_mike,

Thanks for your updates.

The information that may help you with your question related to the Intel(R) Xeon(R) Processor E3-1505L v5 is stated at the Netlist and Pinmap tabs of the http://www.intel.com/content/www/us/en/secure/embedded/nda/products/skylake/6th-gen-core-processor-s... Skylake S Processor LGA Package Ballout Mechanical document # 544753.

On the other hand, the requested info of the Mobile Intel(R) CM236 Chipset is stated at the Netlist and Pinmap tabs of the http://www.intel.com/content/www/us/en/secure/embedded/nda/products/skylake/6th-generation-core-proc... Skylake U Processor Line BGA Package Ballout Mechanical document # 543787.

These documents are accessible using your EDC privileged account.

We hope that this information is useful to you.

Best Regards,

Carlos_A.

MZvon
Beginner
297 Views

Hello, Carlos_A!

Thank you for your reply!

But the first link, that you provide is for LGA 1151 processor package and Intel Xeon Processor E3-1505L v5 is in FCBGA 1440.

Second link doesn't work - it automaticaly redirect to homepage - https://www-ssl.intel.com/content/www/us/en/homepage.html Intel | Data Center Solutions, IOT, and PC Innovation.

And what about mechanical specifiation for pcb?

Can you help me with information about pinout (FCBGA 1440) and mechanical for Intel Xeon Processor E3-1505L v5

and pinout and mechanical specification for Intel Platform Controller Hub CM236?

Thank's in advance!

 

Best regards, Mike.

MZvon
Beginner
297 Views

Hello, Carlos_A!

Is there any updates for me?

Thank's in advance!

Mike.

CarlosAM_INTEL
Moderator
298 Views

Hello Zv_mike,

Thanks for your reply.

The information that may help you is stated in the https://edc.intel.com/Link.aspx?id=13062 Skylake H Processor BGA Package Ballout Mechanical Specification document # 544344,

We hope that this information is useful to you.

Best Regards,

Carlos_A.

View solution in original post

MZvon
Beginner
297 Views

Hello, Carlos_A!

Thank you indeed! That's I want to find. But the issue with detail mechanical specification for this package (FCBGA 1440) for pcb footprint is open.

And the same information (pinouts and pcb footprint) is needed for platform controller hub CM236.

Can you help with this information?

Thank's in advance!

Mike.

CarlosAM_INTEL
Moderator
297 Views

Hello Zv_mike ,

Thanks for your reply.

The information that may help you is stated in section 11, on pages from 97 to 108 of the https://www-ssl.intel.com/content/www/us/en/secure/embedded/nda/products/skylake/100-c230-series-chi... Intel(R) 100 Series and Intel(R) C230 Series Chipset Family Platform Controller Hub (PCH) External Design Specification (EDS)– Volume 1 of 2 For Skylake Platform Controller Hub (PCH-H) document # 546717.

We hope that this information is useful to you.

Best Regards,

Carlos_A.

MZvon
Beginner
297 Views

Hello, Carlos_A!

Thank you very much! That's exactly what I want to find.

The only one issue that is left - it's detail mechanical specification for package FCBGA 1440 (for Xeon E3-1505l v5) and BGA 837 (for PCH CM236) for pcb footprint.

Can you help with this information?

Thank's in advance!

Mike.

MZvon
Beginner
297 Views

Hello, Carlos_A!

Is there any updates for me about detail mechanical specification for package FCBGA 1440 (for Xeon E3-1505l v5) and BGA 837 (for PCH CM236) for pcb footprint?

Mike.

CarlosAM_INTEL
Moderator
297 Views

Hello Zv_mike ,

Thanks for your updates.

The information that may help you is stated at the http://www.intel.com/content/www/us/en/secure/embedded/nda/products/skylake/6th-gen-core-processor-p... Skylake Platform Package Mechanical Models and Drawings Mechanical Models document # 544514.

We hope that this information may help you.

Best Regards,

Carlos_A.

MZvon
Beginner
297 Views

Hello, Carlos_A

Thank you indeed!

That's exactly what I want to find!

Thank you very much again!

Mike

JDood
Novice
297 Views

Hi Mike,

Our team heer in Ircona have over 15 years experience designing Intel based motherboards and so can provide you with assistance should you require it. Additionally, our BIOS team have been providing customised BIOS solutions over this period as well. If you have not finalised your BIOS choice yet, we can provide full access to source code or develop a customised solution and deliver it in binary form without you having to go to the expense of purchasing source code or building the expertise in-house.

Please contact me on mailto:john.doody@ircona.com john.doody@ircona.com if you wish to discuss it further

Thanks

John

MZvon
Beginner
297 Views

Hello, Carlos_A!

The ball scheme for PCH CM236 package is very complex.

Is there any ball coordinate table (like for Xeon https://edc.intel.com/Link.aspx%3Fid%3D13062 Skylake H Processor BGA Package Ballout Mechanical Specification document # 544344) for PCH-H CM236 package?

The information from document # 544514 is not enough.

Thank's in advance!

Mike.

CarlosAM_INTEL
Moderator
297 Views

Hello Zv_mike ,

Thanks for your reply.

We would like to help you, but based on deep researches through all the sources, the only available information is the provided on our previous communications.

We apologize for any inconvenience that this may cause.

Best Regards,

Carlos_A .

Reply