I need eepromARMtool to modify the MAC address of i210 and E810

[liangmeiLiu]

Dear support team,

Where can I find the eepromARMtool source code? I am working on an ARM based board that uses an i210 and E810. I would like to program the spi flash via this tool so that I can edit mac address.

My email is <email removed> pls sent it to me, thanks.

[Sazirah]

Hi liangmeiLiu,

Thank you for posting in Intel Ethernet Communities.

Regarding your enquiry about eepromARMtool to modify the MAC address, kindly refer below link:

https://www.intel.com/content/www/us/en/secure/content-details/634290/eeprom-access-tool-user-s-guide.html?wapkw=i350%20configuration%20in%20EEPROM&DocID=634290

If you have any further questions, we would advise you to contact our Intel Embedded team by posting a question at https://community.intel.com/t5/Embedded-Connectivity/bd-p/embedded-networking-connectivity. They will be assist you as they are more expert on this issue.'

Since there is nothing much I can assist you, we will proceed with archiving this case at our end.

Thank you for using Intel products and services.

Regards,

Sazzy_Intel 

[CarlosAM_INTEL]

Hello,  @Sazirah:

Thank you for contacting Intel Embedded Community.

We need to clarify that this forum is not related to an Intel Embedded Platform (it is related to an ARM implementation) and it is related to the Intel® Ethernet Controller I210.

Due to this, the customer request is out of our scope of support.

Please consider this information when you provide the previous suggestion, or transfer any forums to the channel that you mentioned in your previous communication.

Best regards,

@CarlosAM_INTEL.