Ethernet Products
Determine ramifications of Intel® Ethernet products and technologies
4865 Discussions

Intel X710-DA4 connection problem

YWang91
Beginner
‎04-20-2018 07:12 AM
3,308 Views

I recently purchased an intel x710-da4 and a usrp x300 with (ettus's wire https://www.ettus.com/product/details/ECARD-KIT https://www.ettus.com/product/details/ECARD-KIT ). But the problem is that the ethernet could not be connectted between the two devices.

sudo ethtool -m enp2s0f3

Identifier : 0x03 (SFP)

Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)

Connector : 0x21 (Copper pigtail)

Transceiver codes : 0x01 0x00 0x00 0x04 0x41 0x84 0x80 0xd5

Transceiver type : Infiniband: 1X Copper Passive

Transceiver type : Ethernet: 1000BASE-CX

Transceiver type : FC: short distance (S)

Transceiver type : FC: Electrical inter-enclosure (EL)

Transceiver type : FC: Electrical intra-enclosure (EL)

Transceiver type : FC: Copper Passive

Transceiver type : FC: Twin Axial Pair (TW)

Transceiver type : FC: 1200 MBytes/sec

Transceiver type : FC: 800 MBytes/sec

Transceiver type : FC: 400 MBytes/sec

Transceiver type : FC: 200 MBytes/sec

Transceiver type : FC: 100 MBytes/sec

Encoding : 0x00 (unspecified)

BR, Nominal : 12000MBd

Rate identifier : 0x00 (unspecified)

Length (SMF,km) : 0km

Length (SMF) : 0m

Length (50um) : 0m

Length (62.5um) : 0m

Length (Copper) : 3m

Length (OM3) : 0m

Passive Cu cmplnce. : 0x00 (unspecified) [SFF-8472 rev10.4 only]

Vendor name : Molex Inc.

Vendor OUI : 00:09:3a

Vendor PN : 74752-1301

Vendor rev :

Option values : 0x00 0x00

BR margin, max : 0%

BR margin, min : 0%

Vendor SN : 627540545

Date code : 161001

IOUtil v1.30.25.6 - Intel(R) Network IO Mode Enable/Disable Utility

Copyright (C) 2017 by Intel (R) Corporation. All rights reserved.

Usage:

Run with no arguments to list adapters and usage.

/NIC=X Adapter to modify

/ALL Modify all adapters

/E Enable IO mode

/D Disable IO mode

NIC B/D/F Ven-Dev MAC IO Branding string

=== ======== ========= ============ === =======================================

1) 02/00/00 8086-1572 3CFDFEA6FA58 NA Intel(R) Ethernet Converged Network Ada

2) 02/00/01 8086-1572 3CFDFEA6FA59 NA Intel(R) Ethernet Converged Network Ada

3) 02/00/02 8086-1572 3CFDFEA6FA5A NA Intel(R) Ethernet Converged Network Ada

4) 02/00/03 8086-1572 3CFDFEA6FA5B NA Intel(R) Ethernet Converged Network Ada

5) 06/00/00 8086-1533 0CC47ADC0426 ENA Intel(R) I210 Gigabit Network Connectio

6) 07/00/00 8086-1533 0CC47ADC0427 ENA Intel(R) I210 Gigabit Network Connectio

5 and 6 is my original network card in supermicro.

0 Kudos

Link Copied

6 Replies
YWang91
Beginner
‎04-20-2018 08:19 AM
1,371 Views

And using the IOutil, the result is:

IOUtil v1.30.25.6 - Intel(R) Network IO Mode Enable/Disable Utility

Copyright (C) 2017 by Intel (R) Corporation. All rights reserved.

Adapter 1: IO is not supported. No action.

Adapter 2: IO is not supported. No action.

Adapter 3: IO is not supported. No action.

Adapter 4: IO is not supported. No action.

Adapter 5: IO is enabled. Reboot is required.

Adapter 6: IO is enabled. Reboot is required.

All operations completed.

Adapter 1-4 is the intel X710 port. And I have tried to downgrade to 5.05. Still it did not work.

0 Kudos
Copy link
idata
Employee
‎04-22-2018 06:42 PM
1,371 Views
In response to YWang91

Hi Yuanhao.wang,

 

 

Thank you for posting in Wired Communities. The X710-DA4 used validated cable listed in our website below at

 

https://www.intel.com/content/www/us/en/support/articles/000007045/network-and-i-o/ethernet-products.html

 

 

The Ecard kit is not the supported cable connection. The USRP x300 is a special device, you may try to check with USRP support for compatible network card for the connection.

 

 

Please let me know if you need further clarification.

 

 

Regards,

 

 

Sharon T

 

In response to YWang91
0 Kudos
Copy link
YWang91
Beginner
‎04-23-2018 12:48 PM
1,371 Views
In response to idata

Hi Sharon,

Thank you, and I will contact Ettus.

Another question is could I purchase X710 - T4, and use normal twisted-wire to get to the normal ethernet?

Best,

In response to idata
0 Kudos
Copy link
idata
Employee
‎04-23-2018 07:18 PM
1,371 Views
In response to idata

Hi Yuanhao.wang,

You are welcome. X710-T4 supports RJ45 cable, you may refer to the product specification at

 

https://ark.intel.com/products/93428/Intel-Ethernet-Converged-Network-Adapter-X710-T4 https://ark.intel.com/products/93428/Intel-Ethernet-Converged-Network-Adapter-X710-T4. Please use RJ45 Cat 6 or Cat 6A cable as stated in the link above.

You can also contact our resellers which you can find at http://locate.intel.com if you want to purchase the network adapter.

Hope the above information help.

Regards,

 

Sharon T
In response to idata
0 Kudos
Copy link
Reply

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.