Using Dynamic Device Personalization (DDP) with VLANs on E810 NIC

[phfr83_SDM]

Hi,

I use 2 E810 NIC, a E810-2CQDA2 and a E810-XXV810DA4, on 2 different computer with the same network stack:

• Last Intel Complete Package 28.2.1 including

          - ice driver 1.12.7

          - DDP 1.3.35

• DPDK : 23.07

• High Level Library : PcapPlusPlus 23.09  (cf https://github.com/seladb/PcapPlusPlus)

Question 1 :

What is single VLAN mode on  E810-2CQDA2 and double VLAN mode on E810-XXV810DA4.

Question 2 :

I want to capture network traffic on several VLANs (VLAN 101, VLAN 102, ...) and classify this traffic to direct it to different output queues (VLAN 101 to queue 1, VLAN 102 to queue 2, ..)

Could you send me a bash script or help me to write such a script to configure DDP to classify the traffic with  E810-2CQDA2 and E810-XXV810DA4 NIC ?

Sincerely yours

[Irwan_Intel]

Hello phfr83_SDM.

Thank you for posting on Intel Ethernet Community,

Please check the following link below and let us know if its provide some helpful guides regarding your inquiry.

https://www.intel.com/content/www/us/en/support/articles/000088693/ethernet-products/800-series-network-adapters-up-to-100gbe.html

Link to Intel® Ethernet Controller E810 Dynamic Device Personalization (DDP) Technology Guide.

https://cdrdv2.intel.com/v1/dl/getContent/617015

https://www.intel.com/content/www/us/en/support/articles/000088769/ethernet-products/800-series-network-adapters-up-to-100gbe.html

Regards,

Irwan_Intel

[Irwan_Intel]

Hello phfr83_SDM,

I am following up to see if you have further concerns regarding this post?

Regards,

Irwan_Intel

[Irwan_Intel]

Hello phfr83_SDM,

Kindly note that as we have not received any response from our previous follow-ups, we will be closing this request. 

If you have any more questions in the future, please don't hesitate to post a new question, as this thread will no longer be monitored.

Regards,

Irwan_Intel