1. Does intel ported any RTOS on stratix-10 DVK? 2. How to use AMP on this Stratix S10 board 3. Do provide BSP as well? 4. Is there any additional case involved for using RTOS and linux? 5. What is after sale support cost?

[KMurt4]

We are using Intel stratix-S10, I have few requirements, If you have any info in using the board with below requirements from HPS point of view, Please let us know.

1. AMP(Asymmetric Multiprocessing) usage.

2. In Quad-core processor, CPU0(linux), CPU1(RTOS)

[EBERLAZARE_I_Intel]

Hi,

1. Does Intel ported any RTOS on stratix-10 DVK?

->I suggest that you understand our Stratix 10 SoC boot, there are description on where the RTOS states are in the document.

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-s10-soc-boot.pdf

You may find supported RTOS here:

https://www.intel.com/content/www/us/en/programmable/products/soc/ecosystem.html

2. How to use AMP on this Stratix S10 board

->Please read our document on Using Symmetrical vs. Asymmetrical Multiprocessing (SMP vs. AMP) Modes in Stratix 10 device design Guideline

https://www.intel.co.jp/content/dam/www/programmable/us/en/pdfs/literature/an/an802-s10-soc-device-design-guidelines.pdf#page=54

3. Do provide BSP as well?

-> Board design files, examples, etc are available for downloads as well.

Some, but not all, partner-provided Board Support Package (BSP)s are based on the Golden Hardware Reference Design (GHRD).  

4. Is there any additional case involved for using RTOS and linux?

->Can you elaborate what are you referring to by case?

5. What is after sale support cost?

-> Please contact your Intel sales representative for this information.

Let me check on these if we have any information:

1. AMP(Asymmetric Multiprocessing) usage.

2. In Quad-core processor, CPU0(linux), CPU1(RTOS)

Best Regards.

[EBERLAZARE_I_Intel]

hi,

Do you have any additional questions?