Building embedded Linux for the Terasic DE10-Nano

[SangameshNV]

Hi, 

I am using the following link:
Building embedded Linux for the Terasic DE10-Nano (and other Cyclone V SoC FPGAs) | bitlog.it

In step 3.1,  gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf is not available in Linaro site.

So i went with gcc-linaro-6.4.1-2017.11-x86_64_arm-linux-gnueabihf.

In step 6.2, rel_socfpga-4.11_17.08.02_pr is not available. I am trying to use rel_socfpga-4.10_17.05.01. 

I have successfully completed until step 5, 

But i am unable to compile linux kernel, ending up with makefile errors. 
Is this a compatibility issue between the versions of compiler, uboot and linux kernel.
What version of linux kernel to be used for proper compatibility?

[Jeet14]

Hi,

Please follow the steps given on below link for building U-boot, Linux kernel, RootFS for CV.

https://www.rocketboards.org/foswiki/Documentation/BuildingBootloaderCycloneVAndArria10#Cyclone_V_SoC_45_Boot_from_SD_Card

Regards

Tiwari

[Jeet14]

Hi,

Please let me know if you have any query on this.

Regards

Tiwari

[Jeet14]

As we do not receive any response from you on the previous question/reply/answer that we have provided. Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.