Cyclone V 5CEFA4F23C7 User Guide and DDR3 SDRAM Part Number

[himanshuvaria]

Hello,

I am working on a project which requires the Cyclone V 5CEFA4F23C7 Device. I am not able to find the user guide or datasheet related to this device. Please refer any document if available for reference.

Also I want to know the which vendor & part number of the DDR3 SDRAM Memory is used for Cyclone V 5CEFA4F23C7. For simulation I would require the Memory Model of the DDR3 SDRAM. For that I would require the exact part number being used for this board.

Device Family: Cyclone V

Part No: 5CEFA4F23C7

Please share the documents related to this device.

Regards,

Himanshu

[AdzimZM_Intel]

Hi Himanshu,

The related documents for Cyclone V device can be accessed through this link: https://www.intel.com/content/www/us/en/products/details/fpga/cyclone/v/docs.html

If you are looking for EMIF IP User Guide for Cyclone V device, please look for External Memory Interface Handbook. For example here : https://www.intel.com/content/www/us/en/docs/programmable/683841/17-0/functional-description-uniphy.html

There are no specific memory devices assigned to Cyclone V FPGA device. Any memory devices can be used with the FPGA as long as it is supported.

If you are mean for a board, can you let me know which board that you are referred to?

Regards,

Adzim

[himanshuvaria]

Hello,

Thank you for the response.

I am using the Cyclone V E Development Kit : 5CEFA4/5CEFA7

I want to know the Micron DDR3 part number for this device. Please share your feedback on this.

Best Regards,

Himanshu

[AdzimZM_Intel · Accepted solution]

Hi Himanshu,

I assume you are using Cyclone V E Development Kit from Intel : https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/cyclone/v-e.html

If you are wondering where to get the DDR3 part number, you can always check in the schematic file of the board.

For example in the snapshot I have attached, there is a part number under DDR3 Device component which is MT41J128M16JT-125.

I hope that help you out.

Regards,

Adzim

[himanshuvaria]

Thankyou for the response. It did worked out for me.

[AdzimZM_Intel]

I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.