DE0-Nano Send data to PC

[AmirKhan]

Hi,

I want to receive data from my DE0-Nano while the design is running. I have seen the discussion https://community.intel.com/t5/FPGA-SoC-And-CPLD-Boards-And/Communication-PC-De0-Nano/m-p/120898#M5939 but could not reach to final implementation. I am newbie in this field. I am unable to understand the sld instructions for sending the data back to TCP/I server. It can be better framed as I am not able to place the output of a pin in a DataRegister of Virtual JTAG IP and then send it to the pc. 

I want to use this board for interfacing it with my image sensor and send the generated to my PC. I have seen python implementation of sending data to this boarding while design is running but the other way I am unable to understand the instructions. I have also taken the help of the blog https://idlelogiclabs.com/2014/07/12/virtual-com-port-connection-de0-nano-vj-uart/# but unable to understand the reverse communication i.e. from board to PC. Your quick response is highly appreciated. 

[AqidAyman_Intel]

We sincerely apologize for the inconvenience caused by the delay in addressing your Forum queries. Due to an unexpected back-end issue in our system, your Forum cases, along with others, did not get through as intended. As a result, we have a backlog of cases that we are currently working through one by one.

Please be assured that we are doing everything we can to resolve this issue as quickly as possible. However, this process will take some time, and we kindly ask for your patience and understanding during this period. The cases will be attended by AE shortly.

We appreciate your patience and understanding, and we are committed to providing you with the best support possible.

Thank you for your understanding.

[AqidAyman_Intel]

Hello,

May I know are you still facing the issue?

Regards,

Aqid

[AqidAyman_Intel]

As we do not receive any response from you on the previous question/reply/answer that we have provided. Please login to ‘https://supporttickets.intel.com/s/?language=en_US’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support. The community users will be able to help you on your follow-up questions.