"PSoC -5LP Cypress -059 prototyping kit USB issue

[shuvra]

Kindly look into it. Please verify with a logic analyzer or tell me how to do that.

[shuvra]

port 8 : Potentiostat

Hardware ID: USB\VID_04B5&PID_0081&REV_0000
Setup Class: libusb-win32 devices
Class GUID: {eb781aaf-9c70-4523-a5df-642a87eca567}
PDO Name: \Device\USBPDO-2
Service Name: libusb0

Connection Information
ConnectionIndex: 0x8
CurrentConfigurationValue: 0x1
Speed: 0x1 (UsbFullSpeed)
DeviceIsHub: FALSE
DeviceAddress: 0x11
NumberOfOpenPipes: 0x2
ConnectionStatus: DeviceConnected

Pipe #0

Endpoint Descriptor
bLength: 0x7
bEndpointAddress: 0x81 [IN]
bmAttributes: 0x2 (USB_ENDPOINT_TYPE_BULK)
wMaxPacketSize: 0x40
bInterval: 0x0

Pipe #1

Endpoint Descriptor
bLength: 0x7
bEndpointAddress: 0x2 [OUT]
bmAttributes: 0x3 (USB_ENDPOINT_TYPE_INTERRUPT)
wMaxPacketSize: 0x40
bInterval: 0xA

Device Descriptor
bLength: 0x12
bcdUSB: 0x0200 (USB 2.0)
bDeviceClass: 0xFF (Vendor Specific)
bDeviceSubClass: 0x0
bDeviceProtocol: 0x0
bMaxPacketSize0: 0x8
idVendor: 0x4B5 (ROHM LSI Systems USA, LLC )
idProduct: 0x81
bcdDevice: 0x0
iManufacturer: 0x1 (0x409: University of Oslo)
iProduct: 0x2 (0x409: Potentiostat)
iSerialNumber: 0x0
bNumConfigurations: 0x1

Configuration Descriptor
bLength: 0x9
bDescriptorType: USB_CONFIGURATION_DESCRIPTOR_TYPE
wTotalLength: 0x20
bNumInterfaces: 0x1
bConfigurationValue: 0x1
iConfiguration: 0x3 (0x409: USB Data Interface)
bmAttributes: 0x80 ( Bus_Powered )
MaxPower: 0x32

Interface Descriptor
bLength: 0x9
bInterfaceNumber: 0x0
bAlternateSetting: 0x0
bNumEndpoints: 0x2
bInterfaceClass: 0xFF (Vendor Specific)
bInterfaceSubClass: 0x0
bInterfaceProtocol: 0x0
iInterface: 0x3 (0x409: USB Data Interface)

Endpoint Descriptor
bLength: 0x7
bEndpointAddress: 0x81 [IN]
bmAttributes: 0x2 (USB_ENDPOINT_TYPE_BULK)
wMaxPacketSize: 0x40
bInterval: 0x0

Endpoint Descriptor
bLength: 0x7
bEndpointAddress: 0x2 [OUT]
bmAttributes: 0x3 (USB_ENDPOINT_TYPE_INTERRUPT)
wMaxPacketSize: 0x40
bInterval: 0xA

[Farabi]

Hello,

Is this USB error related to Intel FPGA products? what is the FPGA part number you are using?

regards,

Farabi

[shuvra]

PSoC -5LP Cypress -059 prototyping kit

[Farabi]

Hello,

"PSoC -5LP Cypress -059 prototyping kit" from this statement, I think

Your request is accidentally went into FPGA issues bin. I think this bin is not correct.

I am sorry, could you please raise another case and put the title as : "PSoC -5LP Cypress -059 prototyping kit USB issue" so it will state clear issue and will go to the correct support team?

regards,

Farabi

[shuvra]

port 8 : Potentiostat

Hardware ID: USB\VID_04B5&PID_0081&REV_0000
Setup Class: libusb-win32 devices
Class GUID: {eb781aaf-9c70-4523-a5df-642a87eca567}
PDO Name: \Device\USBPDO-2
Service Name: libusb0

Connection Information
ConnectionIndex: 0x8
CurrentConfigurationValue: 0x1
Speed: 0x1 (UsbFullSpeed)
DeviceIsHub: FALSE
DeviceAddress: 0x11
NumberOfOpenPipes: 0x2
ConnectionStatus: DeviceConnected

Pipe #0

Endpoint Descriptor
bLength: 0x7
bEndpointAddress: 0x81 [IN]
bmAttributes: 0x2 (USB_ENDPOINT_TYPE_BULK)
wMaxPacketSize: 0x40
bInterval: 0x0

Pipe #1

Endpoint Descriptor
bLength: 0x7
bEndpointAddress: 0x2 [OUT]
bmAttributes: 0x3 (USB_ENDPOINT_TYPE_INTERRUPT)
wMaxPacketSize: 0x40
bInterval: 0xA

Device Descriptor
bLength: 0x12
bcdUSB: 0x0200 (USB 2.0)
bDeviceClass: 0xFF (Vendor Specific)
bDeviceSubClass: 0x0
bDeviceProtocol: 0x0
bMaxPacketSize0: 0x8
idVendor: 0x4B5 (ROHM LSI Systems USA, LLC )
idProduct: 0x81
bcdDevice: 0x0
iManufacturer: 0x1 (0x409: University of Oslo)
iProduct: 0x2 (0x409: Potentiostat)
iSerialNumber: 0x0
bNumConfigurations: 0x1

Configuration Descriptor
bLength: 0x9
bDescriptorType: USB_CONFIGURATION_DESCRIPTOR_TYPE
wTotalLength: 0x20
bNumInterfaces: 0x1
bConfigurationValue: 0x1
iConfiguration: 0x3 (0x409: USB Data Interface)
bmAttributes: 0x80 ( Bus_Powered )
MaxPower: 0x32

Interface Descriptor
bLength: 0x9
bInterfaceNumber: 0x0
bAlternateSetting: 0x0
bNumEndpoints: 0x2
bInterfaceClass: 0xFF (Vendor Specific)
bInterfaceSubClass: 0x0
bInterfaceProtocol: 0x0
iInterface: 0x3 (0x409: USB Data Interface)

Endpoint Descriptor
bLength: 0x7
bEndpointAddress: 0x81 [IN]
bmAttributes: 0x2 (USB_ENDPOINT_TYPE_BULK)
wMaxPacketSize: 0x40
bInterval: 0x0

Endpoint Descriptor
bLength: 0x7
bEndpointAddress: 0x2 [OUT]
bmAttributes: 0x3 (USB_ENDPOINT_TYPE_INTERRUPT)
wMaxPacketSize: 0x40
bInterval: 0xA