Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Novice
189 Views

4-bits universal binary counter

Write a VHDL code to design a universal binary counter

 Assign the I/O ports to the boards I/O pins as follows: Design I/O port Board I/O pin
Clock (clk)
CLK_50M
Enable (en)
V_SW(0)
Count up (up)
V_SW(1)
Clear (syn_clr)
V_BT(0)
load
V_BT(1)
Output (q)
G_LED (3 downto 0)
Input (d)
V_SW(5 downto 2)
 Synthesize the circuit and upload it to the FPGA prototyping board.
 Verify the operation of counter.
Hint: you will need to slow down the main clock frequency (50MHZ) to see the LEDs blinking pattern. Use cycle counter to control the counter operations.
Max Count = Max Frequency/Desired Frequency

0 Kudos
5 Replies
Employee
177 Views

Hi Qais Jamal

Thanks for your sharing. Let us know if anything we could help you.

 

Thanks.

Eng Wei

Novice
163 Views

I want a VHDL code to design a universal binary counter and apply it on FPGA at LabsLand

if you can help me

Thank you.

0 Kudos
Novice
161 Views

@EngWei_O_Intel 

 

I want a VHDL code to design a universal binary counter and apply it on FPGA at LabsLand

if you can help me

Thank you.

0 Kudos
Employee
149 Views

Hi Qais

There are few links from Intel providing design example for counter as below:

https://www.intel.com/content/www/us/en/programmable/quartushelp/13.0/mergedProjects/hdl/vhdl/vhdl_p...

https://www.intel.com/content/www/us/en/programmable/support/support-resources/design-examples/desig...

https://fpgacloud.intel.com/devstore/platform/

Else, you can also search for 3rd party design and modify per your usage.

 

Thanks.

Eng Wei

 

Employee
59 Views

Hi Qais

We do not receive any response from you to the previous answer that have been provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

Eng Wei

0 Kudos