Intel® Fortran Compiler
Build applications that can scale for the future with optimized code designed for Intel® Xeon® and compatible processors.
29388 Discussions

internal comp. error for lapack

pivo12
Beginner
‎08-28-2011 09:50 AM
792 Views
Hello,

compiling the inserted file 'clatm5.f' (which is a part of LAPACK distribution) I am encountering th following error:

ifort -xAVX -arch AVX -parallel -c clatm5.f

0_909

: catastrophic error: **Internal compiler error: internal abort** Please report this error along with the circumstances in which it occurred in a Software Problem Report. Note: File and line given may not be explicit cause of this error.
compilation aborted for clatm5.f (code 1)


But when I don't use -AVX options (eg. ifort -parallel -c clatm5.f) compiles smoothly.


Intel Fortran Intel 64 Compiler XE for applications running on Intel 64, Version 12.0.4.191 Build 20110427
Copyright (C) 1985-2011 Intel Corporation. All rights reserved.
FOR NON-COMMERCIAL USE ONLY

Slackware Linux 64bit
Kernel version 2.6.37.6
gcc version 4.5.2
LAPCK version 3.3.1
Intel Core i5-2400 proc.



Thanks.

Tamas I.

----------------------------------------------------------------

[bash]      SUBROUTINE CLATM5( PRTYPE, M, N, A, LDA, B, LDB, C, LDC, D, LDD,
     $                   E, LDE, F, LDF, R, LDR, L, LDL, ALPHA, QBLCKA,
     $                   QBLCKB )
*
*  -- LAPACK test routine (version 3.1) --
*     Univ. of Tennessee, Univ. of California Berkeley and NAG Ltd..
*     November 2006
*
*     .. Scalar Arguments ..
      INTEGER            LDA, LDB, LDC, LDD, LDE, LDF, LDL, LDR, M, N,
     $                   PRTYPE, QBLCKA, QBLCKB
      REAL               ALPHA
*     ..
*     .. Array Arguments ..
      COMPLEX            A( LDA, * ), B( LDB, * ), C( LDC, * ),
     $                   D( LDD, * ), E( LDE, * ), F( LDF, * ),
     $                   L( LDL, * ), R( LDR, * )
*     ..
*
*  Purpose
*  =======
*
*  CLATM5 generates matrices involved in the Generalized Sylvester
*  equation:
*
*      A * R - L * B = C
*      D * R - L * E = F
*
*  They also satisfy (the diagonalization condition)
*
*   [ I -L ] ( [ A  -C ], [ D -F ] ) [ I  R ] = ( [ A    ], [ D    ] )
*   [    I ] ( [     B ]  [    E ] ) [    I ]   ( [    B ]  [    E ] )
*
*
*  Arguments
*  =========
*
*  PRTYPE  (input) INTEGER
*          "Points" to a certian type of the matrices to generate
*          (see futher details).
*
*  M       (input) INTEGER
*          Specifies the order of A and D and the number of rows in
*          C, F,  R and L.
*
*  N       (input) INTEGER
*          Specifies the order of B and E and the number of columns in
*          C, F, R and L.
*
*  A       (output) COMPLEX array, dimension (LDA, M).
*          On exit A M-by-M is initialized according to PRTYPE.
*
*  LDA     (input) INTEGER
*          The leading dimension of A.
*
*  B       (output) COMPLEX array, dimension (LDB, N).
*          On exit B N-by-N is initialized according to PRTYPE.
*
*  LDB     (input) INTEGER
*          The leading dimension of B.
*
*  C       (output) COMPLEX array, dimension (LDC, N).
*          On exit C M-by-N is initialized according to PRTYPE.
*
*  LDC     (input) INTEGER
*          The leading dimension of C.
*
*  D       (output) COMPLEX array, dimension (LDD, M).
*          On exit D M-by-M is initialized according to PRTYPE.
*
*  LDD     (input) INTEGER
*          The leading dimension of D.
*
*  E       (output) COMPLEX array, dimension (LDE, N).
*          On exit E N-by-N is initialized according to PRTYPE.
*
*  LDE     (input) INTEGER
*          The leading dimension of E.
*
*  F       (output) COMPLEX array, dimension (LDF, N).
*          On exit F M-by-N is initialized according to PRTYPE.
*
*  LDF     (input) INTEGER
*          The leading dimension of F.
*
*  R       (output) COMPLEX array, dimension (LDR, N).
*          On exit R M-by-N is initialized according to PRTYPE.
*
*  LDR     (input) INTEGER
*          The leading dimension of R.
*
*  L       (output) COMPLEX array, dimension (LDL, N).
*          On exit L M-by-N is initialized according to PRTYPE.
*
*  LDL     (input) INTEGER
*          The leading dimension of L.
*
*  ALPHA   (input) REAL
*          Parameter used in generating PRTYPE = 1 and 5 matrices.
*
*  QBLCKA  (input) INTEGER
*          When PRTYPE = 3, specifies the distance between 2-by-2
*          blocks on the diagonal in A. Otherwise, QBLCKA is not
*          referenced. QBLCKA > 1.
*
*  QBLCKB  (input) INTEGER
*          When PRTYPE = 3, specifies the distance between 2-by-2
*          blocks on the diagonal in B. Otherwise, QBLCKB is not
*          referenced. QBLCKB > 1.
*
*
*  Further Details
*  ===============
*
*  PRTYPE = 1: A and B are Jordan blocks, D and E are identity matrices
*
*             A : if (i == j) then A(i, j) = 1.0
*                 if (j == i + 1) then A(i, j) = -1.0
*                 else A(i, j) = 0.0,            i, j = 1...M
*
*             B : if (i == j) then B(i, j) = 1.0 - ALPHA
*                 if (j == i + 1) then B(i, j) = 1.0
*                 else B(i, j) = 0.0,            i, j = 1...N
*
*             D : if (i == j) then D(i, j) = 1.0
*                 else D(i, j) = 0.0,            i, j = 1...M
*
*             E : if (i == j) then E(i, j) = 1.0
*                 else E(i, j) = 0.0,            i, j = 1...N
*
*             L =  R are chosen from [-10...10],
*                  which specifies the right hand sides (C, F).
*
*  PRTYPE = 2 or 3: Triangular and/or quasi- triangular.
*
*             A : if (i <= j) then A(i, j) = [-1...1]
*                 else A(i, j) = 0.0,             i, j = 1...M
*
*                 if (PRTYPE = 3) then
*                    A(k + 1, k + 1) = A(k, k)
*                    A(k + 1, k) = [-1...1]
*                    sign(A(k, k + 1) = -(sin(A(k + 1, k))
*                        k = 1, M - 1, QBLCKA
*
*             B : if (i <= j) then B(i, j) = [-1...1]
*                 else B(i, j) = 0.0,            i, j = 1...N
*
*                 if (PRTYPE = 3) then
*                    B(k + 1, k + 1) = B(k, k)
*                    B(k + 1, k) = [-1...1]
*                    sign(B(k, k + 1) = -(sign(B(k + 1, k))
*                        k = 1, N - 1, QBLCKB
*
*             D : if (i <= j) then D(i, j) = [-1...1].
*                 else D(i, j) = 0.0,            i, j = 1...M
*
*
*             E : if (i <= j) then D(i, j) = [-1...1]
*                 else E(i, j) = 0.0,            i, j = 1...N
*
*                 L, R are chosen from [-10...10],
*                 which specifies the right hand sides (C, F).
*
*  PRTYPE = 4 Full
*             A(i, j) = [-10...10]
*             D(i, j) = [-1...1]    i,j = 1...M
*             B(i, j) = [-10...10]
*             E(i, j) = [-1...1]    i,j = 1...N
*             R(i, j) = [-10...10]
*             L(i, j) = [-1...1]    i = 1..M ,j = 1...N
*
*             L, R specifies the right hand sides (C, F).
*
*  PRTYPE = 5 special case common and/or close eigs.
*
*  =====================================================================
*
*     .. Parameters ..
      COMPLEX            ONE, TWO, ZERO, HALF, TWENTY
      PARAMETER          ( ONE = ( 1.0E+0, 0.0E+0 ),
     $                   TWO = ( 2.0E+0, 0.0E+0 ),
     $                   ZERO = ( 0.0E+0, 0.0E+0 ),
     $                   HALF = ( 0.5E+0, 0.0E+0 ),
     $                   TWENTY = ( 2.0E+1, 0.0E+0 ) )
*     ..
*     .. Local Scalars ..
      INTEGER            I, J, K
      COMPLEX            IMEPS, REEPS
*     ..
*     .. Intrinsic Functions ..
      INTRINSIC          CMPLX, MOD, SIN
*     ..
*     .. External Subroutines ..
      EXTERNAL           CGEMM
*     ..
*     .. Executable Statements ..
*
      IF( PRTYPE.EQ.1 ) THEN
         DO 20 I = 1, M
            DO 10 J = 1, M
               IF( I.EQ.J ) THEN
                  A( I, J ) = ONE
                  D( I, J ) = ONE
               ELSE IF( I.EQ.J-1 ) THEN
                  A( I, J ) = -ONE
                  D( I, J ) = ZERO
               ELSE
                  A( I, J ) = ZERO
                  D( I, J ) = ZERO
               END IF
   10       CONTINUE
   20    CONTINUE
*
         DO 40 I = 1, N
            DO 30 J = 1, N
               IF( I.EQ.J ) THEN
                  B( I, J ) = ONE - ALPHA
                  E( I, J ) = ONE
               ELSE IF( I.EQ.J-1 ) THEN
                  B( I, J ) = ONE
                  E( I, J ) = ZERO
               ELSE
                  B( I, J ) = ZERO
                  E( I, J ) = ZERO
               END IF
   30       CONTINUE
   40    CONTINUE
*
         DO 60 I = 1, M
            DO 50 J = 1, N
               R( I, J ) = ( HALF-SIN( CMPLX( I / J ) ) )*TWENTY
               L( I, J ) = R( I, J )
   50       CONTINUE
   60    CONTINUE
*
      ELSE IF( PRTYPE.EQ.2 .OR. PRTYPE.EQ.3 ) THEN
         DO 80 I = 1, M
            DO 70 J = 1, M
               IF( I.LE.J ) THEN
                  A( I, J ) = ( HALF-SIN( CMPLX( I ) ) )*TWO
                  D( I, J ) = ( HALF-SIN( CMPLX( I*J ) ) )*TWO
               ELSE
                  A( I, J ) = ZERO
                  D( I, J ) = ZERO
               END IF
   70       CONTINUE
   80    CONTINUE
*
         DO 100 I = 1, N
            DO 90 J = 1, N
               IF( I.LE.J ) THEN
                  B( I, J ) = ( HALF-SIN( CMPLX( I+J ) ) )*TWO
                  E( I, J ) = ( HALF-SIN( CMPLX( J ) ) )*TWO
               ELSE
                  B( I, J ) = ZERO
                  E( I, J ) = ZERO
               END IF
   90       CONTINUE
  100    CONTINUE
*
         DO 120 I = 1, M
            DO 110 J = 1, N
               R( I, J ) = ( HALF-SIN( CMPLX( I*J ) ) )*TWENTY
               L( I, J ) = ( HALF-SIN( CMPLX( I+J ) ) )*TWENTY
  110       CONTINUE
  120    CONTINUE
*
         IF( PRTYPE.EQ.3 ) THEN
            IF( QBLCKA.LE.1 )
     $         QBLCKA = 2
            DO 130 K = 1, M - 1, QBLCKA
               A( K+1, K+1 ) = A( K, K )
               A( K+1, K ) = -SIN( A( K, K+1 ) )
  130       CONTINUE
*
            IF( QBLCKB.LE.1 )
     $         QBLCKB = 2
            DO 140 K = 1, N - 1, QBLCKB
               B( K+1, K+1 ) = B( K, K )
               B( K+1, K ) = -SIN( B( K, K+1 ) )
  140       CONTINUE
         END IF
*
      ELSE IF( PRTYPE.EQ.4 ) THEN
         DO 160 I = 1, M
            DO 150 J = 1, M
               A( I, J ) = ( HALF-SIN( CMPLX( I*J ) ) )*TWENTY
               D( I, J ) = ( HALF-SIN( CMPLX( I+J ) ) )*TWO
  150       CONTINUE
  160    CONTINUE
*
         DO 180 I = 1, N
            DO 170 J = 1, N
               B( I, J ) = ( HALF-SIN( CMPLX( I+J ) ) )*TWENTY
               E( I, J ) = ( HALF-SIN( CMPLX( I*J ) ) )*TWO
  170       CONTINUE
  180    CONTINUE
*
         DO 200 I = 1, M
            DO 190 J = 1, N
               R( I, J ) = ( HALF-SIN( CMPLX( J / I ) ) )*TWENTY
               L( I, J ) = ( HALF-SIN( CMPLX( I*J ) ) )*TWO
  190       CONTINUE
  200    CONTINUE
*
      ELSE IF( PRTYPE.GE.5 ) THEN
         REEPS = HALF*TWO*TWENTY / ALPHA
         IMEPS = ( HALF-TWO ) / ALPHA
         DO 220 I = 1, M
            DO 210 J = 1, N
               R( I, J ) = ( HALF-SIN( CMPLX( I*J ) ) )*ALPHA / TWENTY
               L( I, J ) = ( HALF-SIN( CMPLX( I+J ) ) )*ALPHA / TWENTY
  210       CONTINUE
  220    CONTINUE
*
         DO 230 I = 1, M
            D( I, I ) = ONE
  230    CONTINUE
*
         DO 240 I = 1, M
            IF( I.LE.4 ) THEN
               A( I, I ) = ONE
               IF( I.GT.2 )
     $            A( I, I ) = ONE + REEPS
               IF( MOD( I, 2 ).NE.0 .AND. I.LT.M ) THEN
                  A( I, I+1 ) = IMEPS
               ELSE IF( I.GT.1 ) THEN
                  A( I, I-1 ) = -IMEPS
               END IF
            ELSE IF( I.LE.8 ) THEN
               IF( I.LE.6 ) THEN
                  A( I, I ) = REEPS
               ELSE
                  A( I, I ) = -REEPS
               END IF
               IF( MOD( I, 2 ).NE.0 .AND. I.LT.M ) THEN
                  A( I, I+1 ) = ONE
               ELSE IF( I.GT.1 ) THEN
                  A( I, I-1 ) = -ONE
               END IF
            ELSE
               A( I, I ) = ONE
               IF( MOD( I, 2 ).NE.0 .AND. I.LT.M ) THEN
                  A( I, I+1 ) = IMEPS*2
               ELSE IF( I.GT.1 ) THEN
                  A( I, I-1 ) = -IMEPS*2
               END IF
            END IF
  240    CONTINUE
*
         DO 250 I = 1, N
            E( I, I ) = ONE
            IF( I.LE.4 ) THEN
               B( I, I ) = -ONE
               IF( I.GT.2 )
     $            B( I, I ) = ONE - REEPS
               IF( MOD( I, 2 ).NE.0 .AND. I.LT.N ) THEN
                  B( I, I+1 ) = IMEPS
               ELSE IF( I.GT.1 ) THEN
                  B( I, I-1 ) = -IMEPS
               END IF
            ELSE IF( I.LE.8 ) THEN
               IF( I.LE.6 ) THEN
                  B( I, I ) = REEPS
               ELSE
                  B( I, I ) = -REEPS
               END IF
               IF( MOD( I, 2 ).NE.0 .AND. I.LT.N ) THEN
                  B( I, I+1 ) = ONE + IMEPS
               ELSE IF( I.GT.1 ) THEN
                  B( I, I-1 ) = -ONE - IMEPS
               END IF
            ELSE
               B( I, I ) = ONE - REEPS
               IF( MOD( I, 2 ).NE.0 .AND. I.LT.N ) THEN
                  B( I, I+1 ) = IMEPS*2
               ELSE IF( I.GT.1 ) THEN
                  B( I, I-1 ) = -IMEPS*2
               END IF
            END IF
  250    CONTINUE
      END IF
*
*     Compute rhs (C, F)
*
      CALL CGEMM( 'N', 'N', M, N, M, ONE, A, LDA, R, LDR, ZERO, C, LDC )
      CALL CGEMM( 'N', 'N', M, N, N, -ONE, L, LDL, B, LDB, ONE, C, LDC )
      CALL CGEMM( 'N', 'N', M, N, M, ONE, D, LDD, R, LDR, ZERO, F, LDF )
      CALL CGEMM( 'N', 'N', M, N, N, -ONE, L, LDL, E, LDE, ONE, F, LDF )
*
*     End of CLATM5
*
      END
[/bash]

0 Kudos

Link Copied

3 Replies
mecej4
Honored Contributor III
‎08-28-2011 06:23 PM
792 Views
The same error occurs with the Windows 12.0.5.221 versions (IA32 as well as X64) of the compiler with the command line

C:\> ifort /QxAVX /arch:AVX /Qparallel /c clamt5.f

but no error occurs when the /Qparallel option is left out.
0 Kudos
Copy link
TimP
Honored Contributor III
‎08-29-2011 04:44 AM
792 Views
I found it difficult to save a compilable version from this post.
I note that this internal error appears to result from the combination of /Qparallel with auto-vectorization. With a newer (generally buggier) compiler, I don't get the internal error.
I don't know what should happen when you set /QxAVX /arch:AVX . I would interpret that as setting aggressive AVX compilation for Intel only over-ridden by less aggressive AVX code generation without the Intel-AVX-only run-time check.
0 Kudos
Copy link
Steven_L_Intel1
Employee
‎08-29-2011 09:11 AM
792 Views
I can reproduce the error in 12.0.5 but not in 12.0.6, which I expect to be available next week.
0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.