intel ssd EnduranceAnalyzer issue

[수수완_박]

I used Intel SSD (NVME, SSD, etc..). In centos in use intel data center tool.

When you run the following two commands it does not come Endurance Analyzer items.

If anyone knows about this and ask for help

# isdct show -a -intelssd 0

* EnduranceAnalyzer's item is not show

Who knows about this issue, please knock comments

[idata]

Suwan,

Thanks for posting in our forum. We would like to let you know that there is no issue with the endurance analyzer, the situation is that you need to pre-condition the drive and apply some workload for at least 60 minutes.Please check the following http://www.intel.com/content/dam/support/us/en/documents/solid-state-drives/ssd-software/Intel_SSD_DCT_3_0_x_User_Guide.pdf link on page 60 - 4.12, it will explain you how to setup the drive for the calculation of the endurance.Please let us know if you require any more assistance.NC

[idata]

Suwan,

We are following up the thread and we would like to know if you require any more assistance.We will be waiting for your response.Regards,NC