BSP file for CycloneV

[Verilogenjoyer]

I need bsp file for DE1SoC CycloneV board. I need that for openCL.

[BoonBengT_Altera · Accepted solution]

Hi @Verilogenjoyer,

Thank you for posting in Intel community forum and hope all is well.

Would like to highlight that the OpenCL SDK tool has been discontinued, more details can be found here (https://www.intel.com/content/www/us/en/content-details/738067/pdn-2219-intel-is-discontinuing-the-following-software-ordering-codes.html).

However we would still try our best to clarify on the situation.

As for the question on the BSP unfortunately as the board are from Terasic we do not have the BSP for that, would suggest perhaps to check with Terasic on the same.

We do have other devices BSP in the link below:

https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-guidance/opencl-bsp-support.html

As well as the start guide for cyclone soc dev kits. (https://www.intel.com/content/www/us/en/docs/programmable/683030/18-1/standard-edition-cyclone-v-soc-getting.html)

Hope that clarify.

Best Wishes

BB

[Verilogenjoyer]

Hi BoonBengT_Intel,

Thank you for answering my question clearly.

I found BSP from Terasic but cant use at openCL so your answer provide to know the reason. Thank you for your support and good wishes.

I wish you will also be happy.

[BoonBengT_Altera]

Hi @Verilogenjoyer,

Happy to help and good to know that your doubts has been clarify and found the clarification helpful, with no further clarification on this thread, it will be transitioned to community support for further help on doubts in this thread. Please login to ‘https://supporttickets.intel.com’, view details of the desire request, and post a feed/response within the next 15 days to allow me to continue to support you. After 15 days, this thread will be transitioned to community support.

Thank you for the questions and as always pleasure having you here.

Best Wishes

BB