EDS build of any example fails!

[rshal2]

Hello,

I try to run a simple example after installation of DS-5 but it keep fails

07:41:20 **** Build of configuration Default for project Altera-SoCFPGA-HardwareLib-16550-CV-ARMCC ****

make all 

armcc -g -O0 --diag_error=warning --diag_suppress=9931 --cpu=Cortex-A9 --no_unaligned_access -IC:/intelFPGA_pro/18.1/embedded/ds-5//../ip/altera/hps/altera_hps/hwlib/include -IC:/intelFPGA_pro/18.1/embedded/ds-5//../ip/altera/hps/altera_hps/hwlib/include/soc_cv_av -Dsoc_cv_av --strict --c99 -c hwlib.c -o hwlib.o

"hwlib.c", line 40: Error: #5: cannot open source input file "alt_printf.h": No such file or directory

 #include <alt_printf.h>

             ^

hwlib.c: 0 warnings, 1 error

make: *** [Makefile:89: hwlib.o] Error 1

07:41:21 Build Finished (took 432ms)

1. I start a ds-5 shell
2. run select_toolchain.bat and select 1 (also tried 2) for arm compiler
3. then run in shell eclipse.exe

Building helloworld-baremetal succeeded, but all other armcc examples fails on similar error "cannot open source input file ", although on searching the files they are founded in

C:\intelFPGA\18.1\embedded\ip\altera\hps\altera_hps\hwlib\include

Any idea ?

ranran