Intel Xeon D-1736NT recomended working temperature

[STURM-GmbH]

Hello,

we are preparing a CFD simulation for our customer and we would like to know the recomended working temperature (idle and under full load) for the Intel Xeon D-1736NT processor.

From what I know in general, the idle temperature should be somewhere between 60-70°C and under load somewhere between 70-80°C.

Kind Regards 

[Jean_Intel]

Hello @STURM-GmbH.

Thank you for posting on the Intel️® communities.  

 We will move your question to the correct subforum. The team in charge will get back to you soon.

Best regards, 

Jean O.  

Intel Customer Support Technician.

[Victor_G_Intel]

Hello STURM-GmbH,

Thank you for posting on the Intel® communities.

In regard to a specific document that will tell you exactly what the recommended temperature is while the processor is on a system that is idle and also under full load, we don’t offer that kind of information and the main reason we don’t offer it at least not in that way is that any sort of temperature ranges can vary based on the system’s design, configuration, and workload; however, there is documentation that we have that is not publicly available that can help you get the temperatures that you need, the document can be found if you search for it in our Resource & Documentation Center (RDC). The name of the document is the following: Intel® Xeon® D-1700 Processor Family Thermal and Mechanical Specification and Design Guide (TMSDG).

In order for you to have access to this document through our Resource & Documentation Center’s (RDC) website, you will need to have a premier account. For more information on how to apply for a premier access account feel free to check the link below.

How to Apply for an Intel® Resource & Documentation Center (RDC) and/or Intel® Developer Zone (DevZone) Account

https://www.intel.com/content/www/us/en/support/articles/000058073/programs/resource-and-documentation-center.html  

If you have any doubts feel free to let us know.

Regards,

Victor G.

Intel Technical Support Technician  

[JoseH_Intel]

Hello STURM-GmbH,

In regards to your question, we would like to encourage you to post the technical information you are looking for in the following community site:

https://community.intel.com/t5/Embedded-Server/bd-p/emb-server-hardware-software-firmware .

They can help you with additional questions about Intel Xeon D Embedded Processors.

Also, if you already know the FAE ( Field Application Engineer ) that corresponds to you, you can contact them to gather more details.

Have a great day.

Best regards,

Jose A.

Intel Customer Support Technician

For firmware updates and troubleshooting tips, visit:

https://intel.com/support/serverbios

[Paul_R_Intel]

Hello STURM-GmbH,

I hope you are doing great, we would like to know if you need further assistance or if we can mark the thread as closed.

Best regards,

Paul R.

Intel Customer Support Technician

For firmware updates and troubleshooting tips, visit:

https://intel.com/support/serverbios

[STURM-GmbH]

Thank you for your support. This thread can be closed.

[Paul_R_Intel]

Hello STURM-GmbH,

I hope you are doing fantastic, we will mark the thread as closed as per your request. please do not hesitate to contact us back if further support is needed. Thank you for choosing Intel.

Best regards,

Paul R.

Intel Customer Support Technician

For firmware updates and troubleshooting tips, visit:

https://intel.com/support/serverbios