Intel® Xeon® Processor and Server Products
Intel® Xeon® Processors, Data Center Products including boards, integrated systems, and RAID Storage
5207 Discussions

R1208SPOSHOR systems won't boot. They get to 4Fh and hang. Any suggestions?

GJohn1
Beginner
‎07-12-2016 09:42 PM
2,059 Views

We're using the E3-1275v5 processor with Kingston 8GB DDR4 DIMMs. The Kingston pn is KVR21E15D8/8. I have checked the jumpers and cables and those look O.K. I took the DIMMs out and then the system responds with 3 long beeps that says I have a memory error. So that part works and it appears the processor is alive. I checked the diagnostic LEDs. If I am reading them correctly, it appears the system stops on 4Fh. Also, the blinking LED next to the 8 diagnostic LEDs goes from blinking green to a solid amber. Then after a short time the machine reboots.

0 Kudos

Link Copied

1 Reply
idata
Employee
‎07-13-2016 02:46 PM
1,218 Views

Hello,

 

 

We can confirm that the memory part number you are using is not validated for the board reason why we recommend testing with the following part numbers instead to narrow the issue:

 

 

Preview file
50 KB
0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.