- Contrassegnare come Nuovo
- Preferito
- Iscriversi
- Disattiva notifiche
- Iscriversi a feed RSS
- Evidenziare
- Stampare
- Segnalare contenuto inappropriato
I have a dead S2600CO.
When I attempt to perform BIOS Recovery, the mother board stops after the flash drive has been accessed with a diagnostic code of 0x6a (DXE NB NMM Init). What can be done to get past this problem? What does DXE NB NMM Init mean?
1 Soluzione
- Contrassegnare come Nuovo
- Preferito
- Iscriversi
- Disattiva notifiche
- Iscriversi a feed RSS
- Evidenziare
- Stampare
- Segnalare contenuto inappropriato
I believe the problem was that I was using a different version of BIOS to perform the recovery than was on the S2600CO. This leads me to believe that you cannot upgrade/downgrade BIOS while attempting to perform a BIOS recovery.
Link copiato
1 Rispondere
- Contrassegnare come Nuovo
- Preferito
- Iscriversi
- Disattiva notifiche
- Iscriversi a feed RSS
- Evidenziare
- Stampare
- Segnalare contenuto inappropriato
I believe the problem was that I was using a different version of BIOS to perform the recovery than was on the S2600CO. This leads me to believe that you cannot upgrade/downgrade BIOS while attempting to perform a BIOS recovery.

Rispondere
Opzioni discussione
- Iscriversi a feed RSS
- Contrassegnare la discussione come nuova
- Contrassegnare la discussione come letta
- Sposta questo Discussione per l'utente corrente
- Preferito
- Iscriversi
- Pagina in versione di stampa