Intel® Xeon® Processor and Server Products
Intel® Xeon® Processors, Data Center Products including boards, integrated systems, and RAID Storage
Announcements
FPGA community forums and blogs have moved to the Altera Community. Existing Intel Community members can sign in with their current credentials.

SS-4200-E

PGilb1
Beginner
2,064 Views

I have a new SS-4200-E that will not boot. I attached 2 new Seagate 1.5 GB sata drives and all I ever got was a flashing power light. After exploring the discussion groups and the web, I have tried the reset button on the unit (the procedure doesn't work as stated, ie flashing lights in unison) and it didn't help the situation. I tried a new single Seagate 500 GB drive, still no luck. When I try the reset button while powering on the unit never flashes power button and HD Leds in unison and the power button stays amber.

Just got back from purchasing a Lacie Big disk network at retail so we can do the project this weekend. No profift this time.

0 Kudos
1 Reply
Edward_Z_Intel
Employee
835 Views

First make sure your hard drive doesn't contain any RAID/partition information. Delete any existing partitions on the hard drive and try again. If you still encounter same issue, then you may be affected by the TA-901 issue. Follow the steps in http://www.intel.com/support/motherboards/server/ss4200-e/sb/CS-028954.htm.

Btw, SS4200-E only supports two-drive or four-drive configuration, so single drive won't work.

0 Kudos
Reply