Two amber light on and another blinking

[idata]

Hello!

I got an S2600CP2J motherboad, but I have a lot of problems with itFirstly, the first runs I have problem accessing to bios setting (when I tap F2 the screen go black) and other problems are two amber light and another amber light blinking and heatsink fans run at full speed, I do a Cmos reset then I have access to bios but the two amber light and another amber light blinking and heatsink fans speed problem not resolved, I ask a friend he told me to do a bios update to latest ones, I do it but in the fans setting I forgot and I tap "Yes" to chassis fans 1 and 2 (during bios update)After bios update is completed I restarted the motherboard and the problem with amber light and heatsink fans problems still not resolved yet; I installed Windows 10, and he installed without problems.

I turned off the motherboard, and I tried after to turned it on from the PSU switch, but the motherboard not running, I see just two green lights and no fans or screen turned on, I do a bios reset and the motherboard running, I tried another time to turn off/on the motherboard, and the problem still no resolved.

problems that I have now are: two amber lights on and another blinking but the system running, heatsink fans run at the max speed even after changed speed from bios,

- Two amber lights on and another blinking but the system running.

- Heatsink fans run at the max speed even after changed speed from bios

- The motherboard not running after turned on (no POST just two green light on). so every time needs to turn it on I reset the bios and the motherboard work again.

Hope to help me please

[idata · Accepted solution]

Hello,

Please proceed to take out the server board out of the chassis and test it over a non static surface with minimal configuration ( cpu, memory, ATX power supply). Test the board without memory looking for beep codes, swap memory modules on the A1 slot and processors on CPU socket# 1 in case you have two installed. If the board does not provide any kind of beep codes we suggest replacing it under warranty.

[idata]

Hello,

Thank you very much, the problems are resolved now by flashing FRU/SDR.

I have another problem, when I browsing the Event Log on BMC I see some event, and I think they are important "BIOS Evt Sensor" and "CATERR"

[idata]

Hello,

Our recommendation now is testing each processor individually to address the issue. "CATERR" is normally related to malfunction on the processors, memory or any other hardware component.