I try to configure Intel AMT technology with the Intel AMT configuration utility but it shows me an error "This configuration option is not available because the system does not support host-based configuration." in a log it shows me a single error "Thread: 2140 (ERROR): ACU Configurator, Category: Exit Source: c: \ workst \ ef650392dcc46f7c \ products \ scs \ components \ acu \ src \ activatormain.cpp: configurator :: LogAndExit Line : 227: *********** Exit with code 68. Details: Invalid parameter was found. (RCSAddress) "I use the command line" ACUConfig.exe / Verbose ConfigAMT AMTConfig2.xml / DecryptionPassword Admin2019. "
The LMS service is installed and executed.
Does anyone know what could be affecting?
First of all I appreciate your support, I updated the firmware from 8.1.71 to 188.8.131.5208 but it was not possible to make the configuration, I actually have physical access to the computer to configure it manually by accessing "Ctrl + p" or preparing a USB with the provisioning but try to do remotely with some type of deployment tool using ACUConfig.exe, ACU.dll and the profile.xml sending them to call through cmd with a script as administrator with the command line <path> \ ACUConfig.exe / Verbose ConfigAMT profile.xml / DecryptionPassword password
I have tried this procedure in windows server 2012 r2 standard and it works without problem but with windows 7 I have the aforementioned flaw.
In theory Windows 7 32 and 64 is supported or maybe, correct me if I'm wrong, do you think I have to see that in Windows 7 only allows me the Admin Control Mode and in Windows Server 2012 R2 Standard was displayed in Client Control Mode?