Can you buy the IPEX connector for the r200 anywhere?

[EStei2]

I was thinking of leaving a hook to integrate the realsense camera into my system. Can you buy the IPEX connector called out in the R200 product datasheet. It only has a suggested part number and there's nothing on daiichi-seiko's site about it. Maybe it's under another name?

Thank you

[MartyG · Accepted solution]

I see what you mean about Dai-Ichi-Seiko - they make the I-PEX connectors, hence the IPEX codename,

It looks like the part is the receptacle that the Interconnector Cable plugs into (referred to as the extension cable in some places).

If you are looking to integrate the R200 as a caseless circuit board into your product, it may be easier to buy the Intel Vision Kit from the drone section of the Intel online store (assuming there is not a bar on its commercial use like the RealSense USB developer kits have).

If the Vision Kit did have a non commercial clause, you could order the bare R200 board from an approved Intel distributor. Here's the links to find your nearest local approved distributor.

USA and Canada

http://www.intel.com/content/www/us/en/resellers/where-to-buy/overview.html http://www.intel.com/content/www/us/en/resellers/where-to-buy/overview.html

Rest of world

http://intel.ly/2lXn4Cw http://intel.ly/2lXn4Cw

Edit: I found a table for the parts on I-Pex.com.

https://www.i-pex.com/Products/detail/83 https://www.i-pex.com/Products/detail/83

[EStei2]

Perfect thank you

[MartyG]

You're very welcome. Good luck with your project! Please come back to the forum any time you need help.