LIPS SDK for RealSense D400 Series,Version 1.0.4.0 Date 2018/12/19

[SneakyLuke]

LIPS SDK for RealSense D400 Series,Version 1.0.4.0 Date 2018/12/19

Hi everyone, LIPS released new version SDK for RS D400 Series,

You could find at https://www.lips-hci.com/downloads/category

Version 1.0.4.0

2018/12/17

10.1MBytes

Model：Intel RealSense D400 Series

System：Windows 64,32 bit

Platform：OpenNI 1.5 and 2.2

Release Note:

• Fixed an issue when changing resolution will cause crash

• Fixed an issue to display serial number properly

• Fixed an issue where FPS couldn’t reach 30

• Enhanced RGB resolution to 1960 x 1080p @ 30 FPS

• Time bomb sets at 20 minutes

Supported Device:

• Intel® RealSense™ Camera D400-Series:

- Intel® RealSense™ Depth Cameras D415 and D435

Supported Interface:

• USB 3.0

Supported Resolution:

• 1920 x 1080p @ 15 or 30 FPS (RGB Only)

• 1280 x 720p @ 15 or 30 FPS (depth & RGB)

• 640 x 480p @ 15 or 30 FPS (depth & RGB) - Default

• 640 x 360p @ 15 or 30 FPS (depth & RGB)

• 320 x 240p @ 30 FPS (RGB Only)

Supported Platform:

• Windows 10 x86 & x64

• Linux x64

- Ubuntu 16.04 (Linux Kernels 4.8 ,4.10, and 4.13)

Supported Firmware:

• Intel D400-Series - Firmware Version: 5.10.6

• You may check & download the firmware at:

- https://realsense.intel.com/intel-realsense-downloads/#firmware

[MartyG]

Thanks very much for your continued support of RealSense in the LIPS SDK, Luke!

[jb455]

Hi, thanks for posting this. I can't find any docs or other info on your website though - what can you actually do with this SDK?

[SneakyLuke]

If you installed OpenNI2.2, you could find the

Sample code at C:\Program Files\OpenNI2\Samples, especially SimpleViewer include point cloud viewer with fusion

Document or turotial at C:\Program Files\OpenNI2\Documentation

If you installed OpenNI1.5, you could find the

Sample code at C:\Program Files\OpenNI\Samples, NiViewer will show all detail

Document or turotial at C:\Program Files\OpenNI\Documentation

Or You could find more sample code at GitHub, https://github.com/lips-hci

Luke

[jb455]

Ok, so it's for getting streams from the camera, alternative to librealsense? Does it work with your 3D scanning or measurement tools?