Memomi Mirror Technalogy used?

[imaje]

hi i just seen the official documentation on intel and they said they are using intel realsense r200 camera for their project but on their own official site they say they used F200 camera can anybody confirm ? i am confused a bit

https://www.youtube.com/watch?v=Xp7s_kCHJS0 https://www.youtube.com/watch?v=Xp7s_kCHJS0

[MartyG · Accepted solution]

Either camera would be capable of producing a virtual mirror. It could be argued that the R200 would be a better choice because it is naturally better at full-body tracking. It really depends though on the technique that they use to put the virtual clothes on the reflection. For example, the RealSense SDK has a sample program called AR Mirror that can use an F200 to overlay virtual objects on a face and have those objects follow the face in real-time.

A company called Chow Sang Sang developed a Magic Mirror with the F200.

https://www.intel.com/content/dam/www/public/us/en/documents/case-studies/realsense-technology-delivers-virtual-fitting-solution-study.pdf https://www.intel.com/content/dam/www/public/us/en/documents/case-studies/realsense-technology-delivers-virtual-fitting-…

[imaje]

i checked the results of scaning of both cameras r200 and sr300 r200 is good in range and scanning but the results produced is too much poor.i just seen easy scan website they produce 3d model and i found that they used high resolution DSLR camera in which realsense camera input is given to DSLR camera and DSCLR camera out is given to pc .I was assumining that realsense camera itself could get good scan results but sad its scanning results are too much poor .and i check sense me software for testing also but camera results are again poor .any help about good scanning using only realsense camera

[imaje]

i checked the results of scaning of both cameras r200 and sr300 r200 is good in range and scanning but the results produced is too much poor.i just seen easy scan website they produce 3d model and i found that they used high resolution DSLR camera in which realsense camera input is given to DSLR camera and DSCLR camera out is given to pc .I was assumining that realsense camera itself could get good scan results but sad its scanning results are too much poor .and i check sense me software for testing also but camera results are again poor .any help about good scanning using only realsense camera

[MartyG]

There is a motion capture program called Ni-Mate that claims to have SR300 compatibility and can be used with Blender.

https://forum.ni-mate.com/t/ni-mate-v2-12-released/580 NI mate v2.12 released! - News - NI mate Forum