Solved: multiple sensors on one UP board

jli84 · ‎04-12-2019

hi,

Can one UP board support multiple sensors (D415)?

Would it be a good idea if adding a usb3.0 hub?

MartyG · ‎04-12-2019

Yes, an Up Board has been shown to be able to support two RealSense 400 Series cameras. Intel support team member Eliza says in the discussion linked to below about a two-camera Up Board setup that a USB 3 hub will be needed to connect two cameras to the Up Board, and recommends use of a mains-powered hub.

https://forums.intel.com/s/question/0D50P0000490XyySAE/aaeon-up-board-setup-with-2x-intel-realsense-depth-camera-d415?language=en_US

The RealSense user in that case concluded that discussion by saying "I did a few tests and I confirm that a Up Squared board handles two D415 without difficulties".

View solution in original post

MartyG · ‎04-12-2019

Yes, an Up Board has been shown to be able to support two RealSense 400 Series cameras. Intel support team member Eliza says in the discussion linked to below about a two-camera Up Board setup that a USB 3 hub will be needed to connect two cameras to the Up Board, and recommends use of a mains-powered hub.

https://forums.intel.com/s/question/0D50P0000490XyySAE/aaeon-up-board-setup-with-2x-intel-realsense-depth-camera-d415?language=en_US

The RealSense user in that case concluded that discussion by saying "I did a few tests and I confirm that a Up Squared board handles two D415 without difficulties".