- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
i want to use vpp for color format convert
everything was ok at the beginning
i follow the step in vpp demo
but when i get here
it always return -15
i check it it means invalid video parameters
follow is my set
pParam->vpp.In.FourCC = MFX_FOURCC_YV12 ;
pParam->vpp.In.CropX = 0 ;
pParam->vpp.In.CropY = 0 ;
pParam->vpp.In.CropW = m_BitInfoHeader.biWidth ;
pParam->vpp.In.CropH = m_BitInfoHeader.biHeight ;
pParam->vpp.In.FrameRateExtD = 1 ;
pParam->vpp.In.FrameRateExtN = 30 ;
pParam->vpp.In.Width = MSDK_ALIGN16(m_BitInfoHeader.biWidth) ;
pParam->vpp.In.Height =MSDK_ALIGN16(m_BitInfoHeader.biHeight) ;
pParam->vpp.In.PicStruct = MFX_PICSTRUCT_PROGRESSIVE ;
// out put data
pParam->vpp.Out.FourCC = MFX_FOURCC_YV12 ;
pParam->vpp.Out.CropX = 0 ;
pParam->vpp.Out.CropY = 0 ;
pParam->vpp.Out.CropW = m_nDstWidth ;
pParam->vpp.Out.CropH = m_nDstHeight ;
pParam->vpp.Out.PicStruct = MFX_PICSTRUCT_PROGRESSIVE ;
pParam->vpp.Out.FrameRateExtN = 30 ;
pParam->vpp.Out.FrameRateExtD = 1 ;
pParam->IOPattern = MFX_IOPATTERN_IN_SYSTEM_MEMORY | MFX_IOPATTERN_OUT_SYSTEM_MEMORY;
pParam->NumExtParam = 0 ;
pParam->ExtParam = NULL ;
sts = m_pMfxVideoVPP->QueryIOSurf(pParamm,request) ;
this always return -15
did i miss some thing in my setting ?
thank you advance
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi China,
VPP output format : MFX_FOURCC_YV12 is not supported! If you want to convert from YV12 for NV12 then the input type should be MFX_FOURCC_YV12 and output MFX_FOURCC_NV12
Also, the FrameRateExtD/N values are invered at in and output. Probably not what you want, and may cause issues.
Regards,
Petter
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Petter Larsson (Intel) wrote:
Hi China,
VPP output format : MFX_FOURCC_YV12 is not supported! If you want to convert from YV12 for NV12 then the input type should be MFX_FOURCC_YV12 and output MFX_FOURCC_NV12
Also, the FrameRateExtD/N values are invered at in and output. Probably not what you want, and may cause issues.
Regards,
Petter
thank you very much for your answer
best wishes
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
MFXInit.impl=HARDWARE|VIA_D3D9
MFXInit.ver=1.1
MFXInit.status=MFX_ERR_NONE
vpp.QueryIOSurf.par.AsyncDepth=0
vpp.QueryIOSurf.par.vpp.In.FourCC=YV12
vpp.QueryIOSurf.par.vpp.In.Resolution=(320,240)
vpp.QueryIOSurf.par.vpp.In.Crop=(0,0,320,240)
vpp.QueryIOSurf.par.vpp.In.FrameRate=15/1
vpp.QueryIOSurf.par.vpp.In.AspectRatio=0:0
vpp.QueryIOSurf.par.vpp.In.PicStruct=PROGRESSIVE
vpp.QueryIOSurf.par.vpp.In.ChromaFormat=MONO
vpp.QueryIOSurf.par.vpp.Out.FourCC=NV12
vpp.QueryIOSurf.par.vpp.Out.Resolution=(0,0)
vpp.QueryIOSurf.par.vpp.Out.Crop=(0,0,320,240)
vpp.QueryIOSurf.par.vpp.Out.FrameRate=15/1
vpp.QueryIOSurf.par.vpp.Out.AspectRatio=0:0
vpp.QueryIOSurf.par.vpp.Out.PicStruct=PROGRESSIVE
vpp.QueryIOSurf.par.vpp.Out.ChromaFormat=MONO
vpp.QueryIOSurf.par.Protected=0
vpp.QueryIOSurf.par.IOPattern=IN_SYSTEM_MEMORY|OUT_SYSTEM_MEMORY
vpp.QueryIOSurf.par.NumExtParam=0
vpp.QueryIOSurf.par.ExtParam=NULL
vpp.QueryIOSurf.request[0].Info.FourCC=0x0
vpp.QueryIOSurf.request[0].Info.Resolution=(0,0)
vpp.QueryIOSurf.request[0].Info.Crop=(0,0,0,0)
vpp.QueryIOSurf.request[0].Info.FrameRate=0/0
vpp.QueryIOSurf.request[0].Info.AspectRatio=0:0
vpp.QueryIOSurf.request[0].Info.PicStruct=UNKNOWN(0)
vpp.QueryIOSurf.request[0].Info.ChromaFormat=MONO
vpp.QueryIOSurf.request[0].Type=UNKNOWN(0)
vpp.QueryIOSurf.request[0].NumFrameMin=0
vpp.QueryIOSurf.request[0].NumFrameSuggested=0
vpp.QueryIOSurf.request[1].Info.FourCC=0x0
vpp.QueryIOSurf.request[1].Info.Resolution=(0,0)
vpp.QueryIOSurf.request[1].Info.Crop=(0,0,0,0)
vpp.QueryIOSurf.request[1].Info.FrameRate=0/0
vpp.QueryIOSurf.request[1].Info.AspectRatio=0:0
vpp.QueryIOSurf.request[1].Info.PicStruct=UNKNOWN(0)
vpp.QueryIOSurf.request[1].Info.ChromaFormat=MONO
vpp.QueryIOSurf.request[1].Type=UNKNOWN(0)
vpp.QueryIOSurf.request[1].NumFrameMin=0
vpp.QueryIOSurf.request[1].NumFrameSuggested=0
vpp.QueryIOSurf.status=MFX_ERR_INVALID_VIDEO_PARAM
i used the tracer and got these information
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
looks like the issue is that you're setting ChromaFormat to MONO. You should be setting this parameter to MFX_CHROMAFORMAT_YUV420 as illustrated in the Media SDK samples.
Regards,
Petter
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page