- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
At stock clocks - I’ve done many builds, this chip is throtteling when rendering. Despite being watercooled. I’ve changed the thermal paste twice. Done all the normal things you do doing any number of builds. Sits at 35C unless under load then slams up to 104 on cores. My old 5960x blows it away rendering because of the throttling. The 5960 is overclocked quite a bit but still rarely hits the upper 50s maxed. I know everyone seems to diss these chips as the chips that made de-Lidding mandatory. I don’t want to void the warranty on this expensive egg cooker. Any suggestions? Thanks!
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
Hello BNeum1
Thank you for the information.
I am noticing that you have a case open in our web portal support reporting the same issue. I would recommend continuing the assistance in that support.
Hope this helps.
Regards,
Leonardo C.
Intel Customer Support Technician
Under Contract to Intel Corporation
링크가 복사됨
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
- 신규로 표시
- 북마크
- 구독
- 소거
- RSS 피드 구독
- 강조
- 인쇄
- 부적절한 컨텐트 신고
Hello BNeum1
Thank you for the information.
I am noticing that you have a case open in our web portal support reporting the same issue. I would recommend continuing the assistance in that support.
Hope this helps.
Regards,
Leonardo C.
Intel Customer Support Technician
Under Contract to Intel Corporation
