Intel N100 PCI Controller Driver in Windows

[Chris444]

Hello, I installed both Intel assist and chipset software for my PELADN. I'm still seeing a PCI Controller driver issue in Windows device Manager including 3 Unknown devices how do I resolve this? Any and all help is much appreciated

[AlHill]

What is the complete model number and manufacturer of your device?

Doc (not an Intel employee or contractor)
[This is the dawning of the age of Colossus, where peace is compulsory, freedom is forbidden, and man’s greatest achievement is man’s greatest mistake.]

[Chris444]

PELADN WI6 N100  it's a mini-pc

[AlHill]

I am looking at the PELADN site and I do not see the downloads.

https://peladn.us/products/peladn-wi6-mini-pc-n100

If you know where the downloads are, look for the intel management engine software.

Also, provide a screen shot of those unknown devices.

Doc (not an Intel employee or contractor)
[This is the dawning of the age of Colossus, where peace is compulsory, freedom is forbidden, and man’s greatest achievement is man’s greatest mistake.]

[Chris444]

Is the PCI Controller driver a management engine or thermal framework? and what about the other unknown device is that a USB driver?

Thanks

[AlHill]

Management engine.

Did you install the chipset software?

Doc (not an Intel employee or contractor)
[This is the dawning of the age of Colossus, where peace is compulsory, freedom is forbidden, and man’s greatest achievement is man’s greatest mistake.]

[Chris444]

Yes, I think the unknowns are other on board components. I installed several different chipset drivers already that didn't clear up the issue.

[Chris444]

Based on my experience building and repairing computers the mini-pc is more complex in finding drivers because of the IC's being proprietary.

[pressed_for_time]

PELADN does have a downloads page, it can be found here .  There are two entries - WI-6 Mini PC Drives 2023 / 12 / 15 and WI-6 Mini PC Win 11 pro 2023 / 12 / 15 - that seem to apply to your PC. If this does not work the email address for customer service is support@peladn.us or there is a form that can be filled in at the end of the downloads page.

[Chris444]

Support is vague I already contacted them numerous times when pushed they don't explain in detail which drivers go to which components. Windows 11 would probably correct however I don't want that OS installed.