KabyLake PCI Express Root Port # 10 - A2B1 not updated/working

[rpalm]

I just bought a i7 7700k with a tomahawk z270 msi Mobo and KabyLake PCI Express Root Port # 10 - A2B1 not updated/working. When I go into device manager it shows the hazard icon. My computer is running worse then my previous amd processor/mobo and i also upgraded my graphic cards. Im wondering if this is the issue, either way id like to fix it. I am struggle to find the correct chipset drivers and bios drivers for this. Also I was a windows 7 upgrade to windows 10 and I read somewhere there was a issue maybe with windows 7 stuff so I also did a disk clean up already. If anyone can help with info/ help me find the right chipset/bios driver or upgrades that would be great!!

[idata · Accepted solution]

Vortex315, Thank you very much for joining the Intel® Processors communities.

In regard to your question, on the link below you will find all the drivers for your board, please look for the "BIOS" and "driver" tabs, in there you will be able to select the operating system:https://www.msi.com/Motherboard/support/Z270-TOMAHAWK.html# down-bios https://www.msi.com/Motherboard/support/Z270-TOMAHAWK.html# down-bios Just in case, if you are using an external video card, remember that you will need to install the graphics drivers provided by the manufacturer of it Please let me know the results of trying the BIOS update and the chipset driver from MSI. Any further questions, please let me know. RegardsAlberto

[idata]

Vortex315, I just wanted to check if the information posted previously was useful for you and if you need further assistance on this matter?

Any questions, please let me know. Regards,Alberto

[rpalm]

Hi, Sorry. So I downloaded the chipset and tried it, that didnt fix it. I think its because the old stuff on the computer is conflicting with the new stuff but as of right now everything is working and given my current state of internet I dont wanna mess with it haha. But when I finally move and get reliable internet I will feel ok to do a full wipe or try some other things. Im sure what you suggested would work though! Thanks!

[idata]

Vortex315: You are welcome. Thank you very much for providing that information.

Sure, no problem, and yes, there might be a conflict between the old and new components, but it is great to hear the PC is working. Any other inquiry, do not hesitate in contact us again. Regards,Alberto R