Multiple Triple Speed Ethernet with microOS II and interniche

[Altera_Forum]

Anybody can tell me how to set the driver to handle multiple TSE in the Nios II software? 

I have Nios II EDS 9.0 sp2, running microOS II with interniche.. As soon as I have 2 TSE Ethernet defined, my system crashed upon execution or when any data coming from the ethernet.   Anybody can help?   Best,   E1

[Altera_Forum]

i have done this before without error, this may be some specific configuration issue. 

 --dalon

[Altera_Forum]

Did you remember if you need to set any parameters or definition to have run? 

 According to Interniche, we only need to enable the MULTI_HOMED and IP_ROUTING definition.   Appreciate if you can help..   Best,

[Altera_Forum]

did not have to do anything. I made one minor modification to the driver to allow me to easily determine which TSE was which, but that is it. 

 Are these 2 entirely separate TSEs with independent SGDMA's or a shared FIFO implementation?  --dalon

[Altera_Forum]

Either way, it gave me the same problem.. What setting you did? 

 I found that tse_mac_device structure array of 4, was only filled with 1 TSE structure address, which is the second ethernet. The first ethernet were never initialized.. So when it received message, it ran an invalid instruction (wildcard instruction).