Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
12669 Discussions

NAND U-Boot for Arria10 Soc Development Kit stucks

Altera_Forum
Honored Contributor II
‎08-07-2017 07:01 AM
1,274 Views

Hi Everybody, 

 

I'm using GSRD 16.1 and EDS 16.1 on Fedora 25 (64bit) OS. 

Using the procedure described at https://rocketboards.org/foswiki/documentation/a10gsrd161nandboot, I built a U_BOOT for NAND, while keeping the prebuilt binaries untouched but it doesn't come up. 

Replacing my U-BOOT with the prebuilt U-BOOT - and it works fine. 

 

On the other hand, 

Replacing the daughterboard with the microSD daughterboard: 

Building my U-BOOT for microSD and using the associated procedures in http://www.alterawiki.com/wiki/socedsgettingstarted, everything works smoothly. 

 

I'm attaching a log for the NAND buildup. 

Any clues?
Preview file
82 KB
0 Kudos

Link Copied

1 Reply
Altera_Forum
Honored Contributor II
‎10-31-2017 06:56 AM
488 Views

Hi, 

 

If the time permits, please use the tested and supported operating system for this example. Feroda is not a tested version. 

 

 

 

Regards, 

CloseCL 

(This message was posted on behalf of Intel Corporation)
0 Kudos
Copy link
Reply

Community support is provided Monday to Friday. Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.