NIOS Serial Communication through JTAG UART

[MWang36]

Hi,

I am currently trying to establish the serial communication between NIOS II and Host PC through JTAG UART. I found some material talked about using nois2-terminal command.

Is there anyone can share some material about how to write C programs and configure the SOPC?

[Abe]

Take a look at this tutorial for getting started with NIOS2:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/tt/tt_my_first_nios_sw.pdf

http://cse.unl.edu/~witty/class/csce351/assignment/NIOS/tutorial/

https://perso-etis.ensea.fr/olivier.romain/Teaching_2A_IUT_UCP_files/tutorial.pdf

these should help you with designing NIOS2 systems

[Ahmed_H_Intel1]

Also you can use the RS232 to communicate with a PC

here is a working RS232 project for writing and reading with RS232 (UART) (Using DE0-Nano-SoC), you are free to change the board but check the pin planner to be compatible with the new board.