Nios II interrupt design example required

Altera_Forum · ‎07-10-2013

I want to understand how to write code for a timer interrupt for the NIOS II in Eclipse. I understand that this will require me to use a timer block in Qsys and than use it to generate the interrupt signal. I am blank on how the C code is to be written and need clarification on this issue.

Is it possible to get a reference design that demonstrates how one may be able to implement interrupts in the NIOS II, with the Qsys side as well as the Eclipse side made manifest? A most humble design shall be well recieved if it can demonstrate the concept.

Altera_Forum · ‎07-10-2013

--- Quote Start ---

Is it possible to get a reference design that demonstrates how one may be able to implement interrupts in the NIOS II, with the Qsys side as well as the Eclipse side made manifest? A most humble design shall be well recieved if it can demonstrate the concept.

--- Quote End ---

See example (LED_PWM is my own Qsys components with HAL):

#include <stdio.h># include <string.h># include "sys/alt_flash.h"
# include "sys/alt_irq.h"# include "system.h"
# include "altera_avalon_pio_regs.h"# include "altera_avalon_timer_regs.h"
//#include "altera_avalon_timer.h"
# include "pwm_avalon_interface_regs.h"# include "pwm_avalon_interface.h"# include "pwm_avalon_interface.c"
//********************** Global Variables ***********************************************
volatile unsigned short int led_dir;
volatile int return_code;
volatile unsigned char i = 0;
volatile unsigned int duty_cycle = {499999, 150000, 60000, 10000, 5000, 2500, 800, 1};
//********************** ISR functions **************************************************
static void timer_isr (void * context)
{ volatile unsigned char* led_ptr;
  volatile unsigned char* dir_ptr;
  IOWR_ALTERA_AVALON_TIMER_STATUS(TIMER_BASE, 0);
  dir_ptr = (volatile unsigned char*)context;
  led_ptr = dir_ptr + 1;
  return_code = altera_avalon_pwm_change_duty_cycle(LED_PWM_BASE, duty_cycle);
  IOWR_ALTERA_AVALON_PIO_DATA(LED_PIO_BASE, *led_ptr);
  if(*dir_ptr)
    { *led_ptr >>= 1;
      i--;
    }
  else
    { *led_ptr <<= 1;
      i++;
    }
  if(*led_ptr & 0x81)
    *dir_ptr ^= 0x1;
}
//********************** Auxiliary functions ********************************************
void check_return_code(unsigned int address, int return_code)
{ if(return_code != ALTERA_AVALON_PWM_OK)
;
//          print_error(address, return_code);
}
//********************* Main function ***************************************************
int main (void)
{ void* led_dir_ptr = (void*)&led_dir;
  led_dir = 0x0100;
  //Timer Initialization
  IOWR_ALTERA_AVALON_TIMER_CONTROL(TIMER_BASE, 0x0003);
  IOWR_ALTERA_AVALON_TIMER_STATUS(TIMER_BASE, 0);
  IOWR_ALTERA_AVALON_TIMER_PERIODL(TIMER_BASE, 0x9f00);
  IOWR_ALTERA_AVALON_TIMER_PERIODH(TIMER_BASE, 0x0024);
  //Register ISR for timer event
  alt_ic_isr_register(TIMER_IRQ_INTERRUPT_CONTROLLER_ID, TIMER_IRQ, timer_isr, led_dir_ptr, 0);
  //Initialize PWM and Check Return Code
  return_code = altera_avalon_pwm_init(LED_PWM_BASE, 500000, 1);
  check_return_code(LED_PWM_BASE, return_code);
  //Enable PWM and Check Return Code
  return_code = altera_avalon_pwm_enable(LED_PWM_BASE);
  check_return_code(LED_PWM_BASE, return_code);
  //Start timer and begin the work
  IOWR_ALTERA_AVALON_TIMER_CONTROL(TIMER_BASE, 0x0007);
//  IOWR_ALTERA_AVALON_PIO_DATA(LED_PIO_BASE, led);
  while (1)
   check_return_code(LED_PWM_BASE, return_code);
}

Altera_Forum · ‎07-16-2013

This is interesting. I suppose that the same shall be done if we have a slave SPI IP as it shall also release interrupts when it recieves data. Is that really the case?