- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi ,
Devboard: 3C120 OS: UClinux Up: NIOS2 I have followed the instruction in this link "alterawikiDOTcom_wiki_DasUBoot" to implement UBOOT. I have run the defualt with no problem using (nios2-generic.h and custom_fpga.h).. when I try to do this procedure for 3C120 according to this link "alterawikiDOTcom_wiki_ guide to 3c120 with u-boot"... I always get this error: "altera_pio.c:77: error: 'LED_PIO_WIDTH' undeclared here (not in a function)" . I have tried to diff the custom_fpga.h and 3c120_fpga.h and I see the different naming convetions on the PIO.. I have tried to comment them out but still gave me error.. See attchment please.. Hope someone could help me.. I have too far on this project prelims.. I have to get this uboot working because the product will be encapsulated and would be very much appreciated if we could programm the chip externall without opening the product..Link Copied
2 Replies
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Could you upload your "custom_fpga.h" File?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Raul,
I have already resolve the problem.. thanks for the reponse anyway..
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page