I3-12100 no boot menu, no video signal

[PeterUjhelyi]

Motherboard: ASRock Z690 PG Riptide

CPU: Intel i3-12100

RAM: Crucial 8GB DDR4 3200MHz CT8G4DFRA32A

PSU (option 1): be quiet! S9-CM-600W 

PSU (option 2): Chieftec GPS-650AB A

OLD GPU: EN9600GT/HTDI/512M/A

Unfortunately, I ran into a problem during my last PC build. After installing the elements used above, the PSC's VGA and BOOT LEDs light up.
I tried taking it apart and putting it back together again. I also tried two different power sources, and also tried all the RAM slots.
The only solution was to install an old video card, and the system booted and everything worked well. However, as soon as I try to restart the system without the old GPU, the problem appears again.
I tried the latest and oldest BIOS versions, and on the motherboard's site recommended one (3.02).

If you have any tips that could help, I would appreciate it.
Thanks in advance.
Regards,
Peter

[AlHill]

I would be contacting asrock.

Doc (not an Intel employee or contractor)
[Maybe Windows 12 will be better]

[PeterUjhelyi]

Thank you for your reply. I already wrote to them, I just wanted to check from the CPU side, to see if anyone has encountered this problem. 

[Jose_Intel]

Hello @PeterUjhelyi

Thank you for posting on the Intel️® communities.

We are really sorry you are experiencing issues with the Intel® Core™ i3-12100 Processor and after the troubleshooting performed so far, the issue persists.

Please answer the following:

·      Is there another motherboard to test?

·      Have you tried clearing the CMOS? How to Clear CMOS to Reset BIOS Settings

Please let us know.

Best regards,

Jose B.

Intel Customer Support Technician

[JoseMab]

I have exactly the same issue.

MB: Gigabye H610M K DDR4
CPU: Intel i3-12100 (BX8071512100)
RAM: AData AD4U32008G22-SGN
PSU: Acteck 500W

I already tried:

I tested with another motherboard.

I tried clearing the CMOS.

The issue is the same: No video, no boot menu.

[Jose_Intel]

Hello PeterUjhelyi

We hope you are doing fine. 

Were you able to try another motherboard and/or clear the CMOS? 

Let us know if you still need assistance. 

Best regards,  

Jose B.   

Intel Customer Support Technician 

[Jose_Intel]

Hello PeterUjhelyi

We hope you are having a nice day. 

We have not heard back from you. So, we will close this thread. If you need any additional information, submit a new question, as this thread will no longer be monitored. 

Best regards. 

Jose B.  

Intel Customer Support Technician. 

[JoseMab]

I have exactly the same issue.

MB: Gigabye H610M K DDR4
CPU: Intel i3-12100 (BX8071512100)
RAM: AData AD4U32008G22-SGN
PSU: Acteck 500W

I already tried:

I tested with another motherboard.

I tried clearing the CMOS.

The issue is the same: No video, no boot menu.