Temperatura intel i3 540 3.06GHz. a 90ºC

[idata]

Hola! tengo una duda sobre la temperatura del microprocesador. Tengo una placa madre Gigabyte H55M USB3, con micro i3 540 3.06GHz con cooler y disipador de fabrica (Intel), 4GB ram, sin overclock ni nada raro. Todo como de fabrica.Corriendo un programa para testear la estabilidad, el micro llega a unos 90ºC. En varios sitios leí que estos micros son muy frescos. En estado idle debe estar en los 27ºC mas o menos. Pero a mi me marca unos 40ºC y la temperatura minima que registró en los dias frescos es de 37ºC. Verifiqué la temperatura desde la BIOS y ronda por los 50ºC.Al programa para testear no lo corrí por mas tiempo por miedo a algun daño por sobrecalentamiento.Andará mal el sensor?aca les dejo unas capturas en estado idle y en carga full del micro:http://img717.imageshack.us/img717/7055/capidle.jpg http://img717.imageshack.us/img717/7055/capidle.jpg http://img231.imageshack.us/img231/6038/capfull.jpg http://img231.imageshack.us/img231/6038/capfull.jpg

Siempre marcó esas temperaturas desde que compre la pc. Asi que problema de limpieza no es. Y tampoco la pasta que va entre el micro y disipador.

Verifiqué todo y esta en optimas condiciones.

Corri una aplicacion de Intel (Intel Processor Diagnostic Tool) y me dice esto: Temperature = 58 degrees C below maximum.

Ya he gastado bastante para comprar esta PC, no quiero seguir invirtiendo en coolers o algun accesorio que tenga que cambiar porque el que trajo de fabrica no funciona como deberia.

[Salem_W_Intel1]

By "Temperatura intel i3 540 3.06GHz. a 90ºC", we understand your system's having an overheating problem. We confirm anything below 72.6°C is fine; this is indicated http://ark.intel.com/Product.aspx?id=46473&code=Intel%C2%AE+Core%E2%84%A2+i3-540+Processor+%284M+Cache%2c+3.06+GHz%29 here, under the "Package Specifications" section. Thus, if the temperature is either reaching or surpassing 72.6°C, to begin troubleshooting, I'd recommend the following:

1. Remove and install the latest temperature monitoring software you are running from within the Operating System.

2. Just to be 100% sure, ensure the heatsink/fan is properly seated.

3. See to it that your board's got the latest BIOS. For this, please, check with the board manufacturer.

Note: The forum support is only provided in English. Hence, as you reply, please, do so in English.

[idata]

Salem! Before writing this question, I have done all that you say.

My motherboard has updated the BIOS, I tried several software to measure temperature(updated) and thermal paste is fine.

The Intel support center tells me try a different motherboard (I have no access to another motherboard).

In the RMA seller where I bought the processor, said that to prove I have to give them the processor for 1 week or more. That's impossible because I use the PC every day.

I've tried everything in my power.

[idata]

Check for Thermal Interface material i.e. thermal paste

[idata]

May i know the power supply model and capacity. Did you try swapping good working powersupply unit.

By the way, thermal paste you have already checked. that should be fine.

Thanks, - Ravi