- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Use Python revision 3.6.5 and GEN5 VRTT revision v1.10.1. In Fast V-Mode Test Validation, run Vmin Violation_VID2 test with reference to (#622198) document.
When FVM_VID2 is 1.5V and Offset_VID2 is 0x27h, The test results show that when the Set Frequency is 1 kHz, the VMAX is 1.702V and the VMIN is only -0.001V. For other Frequency, VMAX is only about 1V, VMIN is only about 0.8V. The values of VMAX and VMIN do not seem reasonable. Under this test condition, when only Offset_VID2 is changed to 0x00h, VMAX is about 1.5V and VMIN is about 1.3V. There seems to be something wrong with the Offset setting.
Have you encountered similar problems before and how to solve them? Please help answer this question, thank you!
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Alice_,
Thank you for posting in Intel community Forum.
For us to further check this, please help provide the following details:
- What is the Intel product that you are inquiring?
- Can you tell us further on what is the purpose of this test?
- Can you tell us why do you need this information?
If you have questions, please let us know. Thank you.
Best regards,
Michael L.
Intel Customer Support Technician
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Alice_,
I hope this message finds you well.
Were you able to check the previous post?
Please let us know if you still need assistance.
Best regards,
Michael L.
Intel Customer Support Technician
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Mike:
Thank you for your reply. The problem has been resolved. The problem was affected by the equipment. At present, the test has been successfully completed.
VRTT is an official voltage regulation test tool required by INTEL(as a RD) . The following files can be downloaded from INTEL's website. May I ask where RD should ask if it encounters problems in test verification?
Best regards,
Alice
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello Alice_,
Thank you for the update.
I am glad that the issue is now fixed. Since there is no more problem, I need to close this inquiry.
If you need further assistance, please post a new question as this thread will no longer be monitored.
Thank you and have a great day.
Best regards,
Michael L.
Intel Customer Support Technician
![](/skins/images/D2683F18326913BBA0436CB7114DD569/responsive_peak/images/icon_anonymous_message.png)
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page