Programmable Devices
CPLDs, FPGAs, SoC FPGAs, Configuration, and Transceivers
21269 Discussions

Arria10GX Development kit question- FPGA OPN

MK_ABQ
New Contributor III
782 Views

Hello,

We  have  a Arria10GX Development kit.  Looking at the following link, it says in the Hardware section that the FPGA OPN is 10AX115S2F45I1SG.

https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/arria/10-gx.html

 

MK_ABQ_0-1675249944979.png

 

But, If we look at the schematic in the same link (all the way down in the link), the schematic gives another part number for Arria 10 - 10AX115F1932C.

 

MK_ABQ_1-1675250061923.png

1) Can I know where I can get the correct schematic for my dev kit?

2). Which FPGA is actually used in the devkit?. ( as of now we use quartus programmer to autodetect and selecting 10AX115S2 family and are able to program the FPGA). But I am very confused now that the schematic says some other FPGA. Please advice. 

 

Thanks

0 Kudos
1 Solution
WZ2
Employee
763 Views

Hi there,

1.    Sorry for the confusion. In fact, 10AX115S2F45I1SG and 10AX115F1932C is two types of FPR for one device. 10AX115F1932C is the old name. So you can safe to use this schematic.

2.    The FPGA is 10AX115S2F45I1SG.

Best regards,

WZ


View solution in original post

0 Kudos
1 Reply
WZ2
Employee
764 Views

Hi there,

1.    Sorry for the confusion. In fact, 10AX115S2F45I1SG and 10AX115F1932C is two types of FPR for one device. 10AX115F1932C is the old name. So you can safe to use this schematic.

2.    The FPGA is 10AX115S2F45I1SG.

Best regards,

WZ


0 Kudos
Reply