Max V static VCCINT current higher than expected

[Altera_Forum]

Hi, 

 Has anyone else experienced higher than expected static current consumption on the VCCINT supply for Max V devices?  I am prototyping with the 5M240ZT100C5N part. The PowerPlay analyzer says I should have about 0.02mA of static VCCINT current. However, I am measuring more like 4.5mA. Dynamic current is as expected.  Nothing else is connected the 1.8V regulator. I am wondering if these devices are meeting their static power spec.  Thanks, Tyler

[Altera_Forum]

Do you have floating inputs or inputs with pull-up connected to ground?

[Altera_Forum]

Hi FvM, 

 Thanks for the response.  No floating inputs or grounded pull-ups.  Also, this high static power consumption is for 1.8V Core power supply.  Regards, Tyler

[Altera_Forum]

--- Quote Start ---  Also, this high static power consumption is for 1.8V Core power supply.  --- Quote End ---   Yes. The pull-ups won't matter. Floating inputs could cause oscillations that also effect the idle current.  You should ask Altera support.