converting an ordinary signal to a global signal?

Altera_Forum · ‎12-20-2010

Hello,

i am using EP3C16 in my project.

due to my carelessness, a clock input is connected to the ordinary pin. now i need to feed this clock into a PLL, as it is not a global clock input, compilation fail to pass. i am now flying a line on my board to temporarily solve the problem.

i wonder if there is any module that can convert an ordinary signal to global signal that can be feed into PLL directly.

thanks.

Altera_Forum · ‎12-20-2010

Not on the Cyclone III... only a clock input pin can feed a PLL.

Altera_Forum · ‎12-20-2010

--- Quote Start ---

Not on the Cyclone III... only a clock input pin can feed a PLL.

--- Quote End ---

thank you for your replying, although it is indeed a bad news.