Can not create RAID 1 on i5-7th using Congatec board

[IBrit2]

Hi all,

I have a Congatec TS175 Mainboard. I want to create a RAID 1. My BIOS has the RST option but the chipset (Intel Kaby Lake Rev 05) doesn't support it, so after set the SATA Mode selection to RST , it drops the connection to the drivers and I can not boot on Windows anymore.  

Anyone can help me with this issue?

Any suggestions are welcome

[David_V_Intel]

Hello IBrit2,

Thank you for posting on the Intel ® communities.

I can see that you are having problems booting into the O.S after attempting to create a RAID, it seems like the problem was changing the SATA mode to RST when in the BIOS. We have listed steps on how to create a RAID when you have an O.S installed, please refer to the link below:

https://www.intel.com/content/www/us/en/support/articles/000005815/technologies.html

I would recommend contacting the motherboard manufacturer to check and see if they have a way for you to recover the O.S so you can boot again.

David V

Intel Customer Support Technician

A Contingent Worker at Intel

[David_V_Intel]

Hello IBrit2,

Were you able to check my latest post? 

Please let me know if the information helped or if you need more assistance.

David V

Intel Customer Support Technician

A Contingent Worker at Intel

[IBrit2]

Hi David,

thank you for support me.

I am in contact with Congatec, they are providing me instructions.

[David_V_Intel]

Hello IBrit2,

Thank you for your response.

I appreciate you taking the time to let me know that you are working with your motherboard manufacturer, I hope they can assist you with this.

I will close this request for now, if you need more assistance do not hesitate to contact us back.

David V

Intel Customer Support Technician

A Contingent Worker at Intel