Rapid Storage Technology
Intel® RST, RAID
This community is designed for sharing of public information. Please do not share Intel or third-party confidential information here.
1795 Discussions

Problem with RSTe driver or above

Community Manager

Hi community, I upgraded the RSTe driver for my RAID 5 array on an X79 board to version (latest).

When I go to boot into safe mode through advanced boot options or msconfig I get a blue screen while loading the "classpnp.sys" file on the safe mode boot screen.

The blue screen has no error code just the standard "an error has occurred" text then stating "IAStoreA.sys" and again with no status or error code.

Also I am unable to get a memory dump because windows cannot access the array to dump the data onto; but when I downgrade to version the problem disappears. so this is more of a bug report then a support request, I was also wondering if anyone else has the same problem with X79 based systems.

My Specs:

12GB of 1600MHZ memory

Intel i7 3820

Gigabyte GA-X79-UD3

Corsair 850W power supply

2x Samsung F1 7200RPM 1TB drives

1x WD Caviar green 5400RPM 1TB drive

All drives are members of the RAID 5 array

Message was edited by: Peter De Sousa

0 Kudos
1 Reply
Community Manager


Since the X79 chipset is installed on a third party motherboard in this case, our recommendation is contacting our chipset support via chat at the following website:

http://www.intel.com/support/feedback.htm?group=chipset# chipset Contact Intel Customer Support

You can also contact the vendor for further assistance on reporting this bug.