RSTCLI64.exe for version 15.2

[JBill3]

Is there going to be an update for the CLI for RST? As it stands right now, we're using version 14.8, but 15.2 is the driver that's out and the CLI is not compatible. We primarily use the CLI to enable Acceleration of a 30GB flash cache chip through scripting. If there is no update that's going to be made available, I'm open to other suggestions.

Thanks for your time.

[idata]

Hi Destrachan,

We will be moving this thread to the correct group of support.Regards,Nestor C

[idata]

Hello Destrachan:

Thank you very much for joining the Intel® Rapid Storage Technology community. In order to provide the most accurate response we will do further research on this subject. As soon as I get any updates I will post all the details on this thread. Any further questions, please let me know. Regards Alberto

[idata]

Hello Destrachan:

I just received some updates in regard to the research we are doing on this matter.

I just wanted to let you know that this information was transfer to the proper team so they can be aware of your comments and feedback, please keep checking our web site, if there is an update for the CLI you will be able to see it there.

https://downloadcenter.intel.com/ https://downloadcenter.intel.com/

Regards Alberto

[NJana1]

I am also looking for an updated version of RSTCLI for 15.x version of the Intel RAID driver.

There is a temporary fix available via HEXEDIT trick mentioned here

This is the behaviour of the CLI with non-cooked / cooked versions check out:

======================================

Microsoft Windows [Version 6.3.9600]

(c) 2013 Microsoft Corporation. All rights reserved.

C:\Windows\system32>rstcli64 -V <<<<<<<< using the 13.2 version of the middleware ( CLI tool )

Intel(R) RST CLI version 13.2 cannot be used with version 15.2 of the driver.

0

C:\Windows\system32>rstcli64 -V <<<<<<<<< using the hexed version

Intel(R) RSTCLI

Middleware Version: 13.2.0.1016

Controller Intel(R) Mobile Express Chipset SATA RAID Controller Driver Version: 15.2.0.1020

Controller Intel(R) Mobile Express Chipset SATA RAID Controller OROM Version: 12.7.0.1936

C:\Windows\system32>

=======================================

It would be great to have a clean official build of these CLI tools from Intel for 15.x versions.

[idata]

theDeamon: Thank you very much for providing that information.

As you mentioned previously, the Intel® RST version 13.2 is the latest version that supports CLI. There is no official statement from Intel informing the support for CLI will be implemented in the case of a release of a new IRST version . Please keep checking our web site for possible updates on the tool:

https://downloadcenter.intel.com/ https://downloadcenter.intel.com/

Regards,

Alberto R