Community
cancel
Showing results for 
Search instead for 
Did you mean: 
chella
Novice
213 Views

flexran build

Hi Team,

During FlexRan build on 20.08 i am getting this error message - 

 ./flexran_build.sh -e -r 5gnr_sub6 -m sd

make[1]: *** [source/phy/lib_dft_idft/CMakeFiles/libdft_idft.dir/all] Error 2
make: *** [all] Error 2

 

During DPDK setup (Option 39) - running this script - ./dpdk-setup.sh Getting the following error message -

/opt/dpdk-19.11/drivers/baseband/turbo_sw/bbdev_turbo_software.c(23): catastrophic error: cannot open source file "phy_turbo.h"
#include <phy_turbo.h>
^

compilation aborted for /opt/dpdk-19.11/drivers/baseband/turbo_sw/bbdev_turbo_software.c (code 4)
make[6]: *** [bbdev_turbo_software.o] Error 4
make[5]: *** [turbo_sw] Error 2
make[4]: *** [baseband] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
------------------------------------------------------------------------------
RTE_TARGET exported as x86_64-native-linuxapp-icc
------------------------------------------------------------------------------

Please help.

Thanks

0 Kudos
4 Replies
Jose_V_Intel
Moderator
194 Views

Hello chella,

 

Thank you for posting on the Intel Community. 

 

Based on the information that you provided and in order to better understand your issue please provide the following information:  


  1. Please provide an Intel® System Support Utility report in .txt format. (make sure to select all the options before the scan)
  2. Provide a system report: https://www.intel.com/content/www/us/en/support/articles/000006351/technologies.html
  3. Is the system running any RAID configuration?

 

Please provide more details about the current issue.


Regards.

Jose V.

Intel® Customer Support Technician


chella
Novice
185 Views

Hi Jose,

 

Here is the information requested -

  1. Please provide an Intel® System Support Utility report in .txt format. (make sure to select all the options before the scan) Attahced.
  2. Provide a system report: https://www.intel.com/content/www/us/en/support/articles/000006351/technologies.html
    The server is linux and i am not able to see an option for that.
  3. Unable to produce this since there is no RAID setup on the server.
Tags (1)
Sebastian_M_Intel
Moderator
160 Views

Hello chella, 

 

Thank you for your reply. 

 

I can see that your request is regarding FlexRAN.   

 

I could see that you already posted the forum in the correct support place https://community.intel.com/t5/Intel-C-Compiler/Flexran-20-08-compile-issue/m-p/1250717  

 

I will recommend you kindly wait for a response on the above-mentioned thread, we will proceed to close this one from our side.  

 

Regards, 

 

Sebastian M  

Intel Customer Support Technician


chella
Novice
96 Views

Hi Team,

Please help on this. It has been nearly a month on this.

Thanks.

Tags (1)