I made the mistake in installing most recent RST on an older Intel S3200SHV Server board with Intel® 82801IR I/O Controller, evidently all hell broke loose as i got spinning dots at reboot. In order to address the issue I set the controller to IDE after unplugging one of the drives. I did some research and apparently version 10.8.0.1003 is the latest one that would work with this legacy controller, can anyone please confirm this and if so, how can i go back to my RAID setup if the server no longer boots when set to RAID (Latest RST has already been uninstalled).
Your suggestions are greatly appreciated
According to https://ark.intel.com/products/31894/Intel-82801IR-IO-Controller https://ark.intel.com/products/31894/Intel-82801IR-IO-Controller is currently a Retired and discontinued product. Support is provided by the Intel® Communities users on the Intel® website.
Could you please provide us with the specific version of RSTe you have currently installed and which was the version you had previously installed?
Here is a link to the available downloads for this board:https://downloadcenter.intel.com/product/46534/Intel-Server-Board-S3200SHV Downloads for Intel® Server Board S3200SHV
If you have any more questions, please let me know.
Intel always recommends using validated hardware/software configuration to avoid unforeseen issues.